Ever since my graduation I was involved in numerical modelling of the mechanical behaviour of structures and manufacturing processes. This field is a combination of (computational) mechanics, materials science, production technology and numerics.
Since 2011, I lead the group Nonlinear Solid Mechanics, and I became full professor in 2015. The main strength of this group is the simulation and optimization of forming processes.
Currently, I am
- Portfolioholder (vice-dean) Research in the Board of the Faculty Engineering Technology
- Associate Editor of the International Journal of Material Forming
- Member of the Steering Group of the Fraunhofer Innovation Platform for Advanced Manufacturing at UT
- Chairman of the Board of the Graduate School Engineering Mechanics and local director
- Past-President of ESAFORM
- Acting chairman of the Board of the Dutch Platform for Mechanical Engineering
Expertise
Material Science
- Material
- Strain
- Friction
- Spring Steel
- Temperature
- Bending
Engineering
- Models
- Metal Forming
Organisations
Main Research Interest
- Numerical simulation of forming processes e.g. deepdrawing, incremental sheet forming, extrusion, rolling, cutting.
- Stability of plastic deformation and stability of material models in FEM analysis (including mesh dependency, localization and convergence).
- Optimization and robustness in forming processes.
- Object Oriented Programming (finite element programs, mesh generation programs). The C++ framework FeaTure for Finite Element programming and a collection of C++ tensor classes are freely available.
Publications
2024
Research data/data sets associated with PhD dissertation/research of Shahrzad Mirhosseini, entitled: Modeling the Effect of Retained Austenite in Forming of TRIP-Aided Dual Phase Steel (2024)[Dataset Types › Dataset]. Areda (University of Twente). Mirhosseini, S. S., van den Boogaard, T. & Atzema, E. H.Modeling the Effect of Retained Austenite in Forming of TRIP-Aided Dual Phase Steel (2024)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Mirhosseini, S. S.https://doi.org/10.3990/1.9789036561136Radial basis function interpolation of fields resulting from nonlinear simulations (2024)Engineering with Computers, 40, 129-145. de Gooijer, B. M., Havinga, J., Geijselaers, H. J. M. & van den Boogaard, A. H.https://doi.org/10.1007/s00366-022-01778-4Comparative study of artificial neural network and physics-informed neural network application in sheet metal forming (2024)In Material Forming, ESAFORM 2024: The 27th International ESAFORM Confernce on Material Forming held in Toulouse, France, April 24-26, 2024 (pp. 2278-2288) (Materials Research Proceedings; Vol. 41). Association of American Publishers. Munzone, F., Hazrati, J., Hakvoort, W. & van den Boogaard, T.https://doi.org/10.21741/9781644903131-251
2023
Local model order reduction to accelerate additive manufacturing simulations (2023)[Contribution to conference › Abstract] 6th International Workshop on Model Reduction Techniques, MORTech 2023 (Submitted). Nijhuis, B., Havinga, J., Geijselaers, B. & van den Boogaard, T.Capturing Local Temperature Evolution During Additive Manufacturing Through Fourier Neural Operator (2023)In 43rd Computers and Information in Engineering Conference (CIE). Article DETC2023-117055 (Proceedings of the ASME Design Engineering Technical Conference; Vol. 2). American Society of Mechanical Engineers. Chen, J., Xu, W., Baldwin, M., Nijhuis, B., van den Boogaard, T., Gutiérrez, N. G., Narra, S. P. & McComb, C.https://doi.org/10.1115/DETC2023-117055Design of a new process route for closed die forging and subsequent energy-neutral heat treatment (2023)[Thesis › EngD Thesis]. University of Twente. Demirkol, Y.Computing Sheet Rolling Instabilities with a Shell Finite Element Model (2023)In Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 2 (pp. 541-552) (Lecture Notes in Mechanical Engineering). Springer. Cometa, A., Geijselaers, H. J. M., Havinga, J. & van den Boogaard, A. H.https://doi.org/10.1007/978-3-031-40920-2_56Initiation and growth of edge cracks after shear cutting of dual-phase steel (2023)International journal of advanced manufacturing technology, 127(5-6), 2327-2341. Khalilabad, M. M., Perdahcıoğlu, S., Atzema, E. & Boogaard, T. v. d.https://doi.org/10.1007/s00170-023-11482-2Efficient Thermomechanical Modelling of Large-Scale Metal Additive Manufacturing (2023)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Nijhuis, B.https://doi.org/10.3990/1.9789036556477Differential hardening of low carbon steel in sheet metal forming (2023)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Mulder, H.https://doi.org/10.3990/1.9789036556262Experimental and numerical study of pinching phenomena in sheet metal rolling processes (2023)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Cometa, A.https://doi.org/10.3990/1.9789036556125Modelling of yield point phenomenon in bake-hardening grade steel (2023)In Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023 (pp. 1511-1520) (Materials Research Proceedings; Vol. 28). Association of American Publishers. Deshmane, N. S., Perdahcioglu, S. E. & van den Boogaard, T.https://doi.org/10.21741/9781644902479-163The effect of heating stage parameters on AlSi coating microstructure and fracture at high temperatures (2023)Materials Science & Engineering A, 865. Article 143812. Zaman, S. B., Hazrati, J., de Rooij, M. B. & van den Boogaard, T.https://doi.org/10.1016/j.msea.2022.143812An In-Plane Bending Test to Characterize Edge Ductility in High-Strength Steels (2023)Journal of Materials Engineering and Performance, 32, 1892-1904. Khalilabad, M. M., Perdahcıoğlu, E. S., Atzema, E. H. & van den Boogaard, A. H.https://doi.org/10.1007/s11665-022-07202-8Response of 2D and 3D crystal plasticity models subjected to plane strain condition (2023)Mechanics Research Communications, 128. Article 104047. Mirhosseini, S., Perdahcıoğlu, E. S., Atzema, E. H. & van den Boogaard, A. H.https://doi.org/10.1016/j.mechrescom.2023.104047Asymptotic homogenization in the determination of effective intrinsic magnetic properties of composites (2023)Results in Physics, 44. Article 106188. Soyarslan, C., Havinga, J., Abelmann, L. & van den Boogaard, T.https://doi.org/10.1016/j.rinp.2022.106188Prediction of texture-induced plastic anisotropy in AA6014-T4 aluminium sheets utilising two different crystal plasticity-based constitutive models (2023)[Book/Report › Book]. IOP Science. Wessel, A., Perdahcioglu, E., Butz, A., van den Boogaard, T. & Volk, W.https://doi.org/10.1088/1757-899X/1284/1/012059
2022
Accounting for non-normal distribution of input variables and their correlations in robust optimization (2022)Optimization and Engineering, 23, 1803-1829. Nejadseyfi, O., Geijselaers, H. J. M., Atzema, E. H., Abspoel, M. & van den Boogaard, A. H.https://doi.org/10.1007/s11081-021-09660-wAsymptotic Homogenization in the Determination of Effective Intrinsic Magnetic Properties of Composites (2022)[Working paper › Preprint]. ArXiv.org. Soyarslan, C., Havinga, J., Abelmann, L. & van den Boogaard, T.https://doi.org/10.48550/arXiv.2212.00150A data-driven model updating approach for robust optimization of (multi-stage) production processes (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Munzone, F., Hazrati, J., Hakvoort, W. & van den Boogaard, T.Modelling the Battery-can manufacturing process for cylindrical batteries (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Rathore, S., Atzema, E. H. & van den Boogaard, T.Multi-scale friction model for Aluminum sheet metal forming (2022)[Contribution to conference › Poster] 25th Engineering Mechanics Symposium, EM 2022. Jalalimoghadas, F., Hazrati, J., van den Boogaard, T. & de Rooij, M. B.Surrogate modelling and robust optimization of multi-stage metal forming processes (2022)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. de Gooijer, B. M.https://doi.org/10.3990/1.9789036554152Experimental study on the mechanism of pinching in cold-rolling processes (2022)Steel research international, 93(8). Article 2100812. Cometa, A., Geijselaers, H. J. M., van den Boogaard, A. H., Wentink, D. J., Hol, C. W. J. & Jacobs, L. J. M.https://doi.org/10.1002/srin.202100812
Research profiles
- Nonlinear Solid Mechanics.
- Nonlinear Material Mechanics (Post graduate course EM).
- Mechanics of Large Deformations (Post graduate course EM).
Affiliated study programs
Courses academic year 2024/2025
Courses in the current academic year are added at the moment they are finalised in the Osiris system. Therefore it is possible that the list is not yet complete for the whole academic year.
Courses academic year 2023/2024
Address
University of Twente
Horst Complex (building no. 20), room N130
De Horst 2
7522 LW Enschede
Netherlands
University of Twente
Horst Complex N130
P.O. Box 217
7500 AE Enschede
Netherlands
Scan the QR code or