Expertise
Material Science
- Sensor
- Material
- Fused Filament Fabrication
Physics
- Model
- Hysteresis
- Shears
Engineering
- Using Sensor
- Capacitive
Organisations
Publications
2024
Sensing by Instrumented 3D Printed Pessary (2024)In FLEPS 2024 - IEEE International Conference on Flexible and Printable Sensors and Systems, Proceedings. IEEE. Kosmas, D., Abayazid, M. & Krijnen, G.https://doi.org/10.1109/FLEPS61194.2024.10603500A Sensorized 3D Printed Gap-Gauge Aiming to Improve Knee Prosthesis Survival (2024)IEEE sensors journal (E-pub ahead of print/First online). Kosmas, D., Jonbergen, H.-P. V., Schouten, M., Abayazid, M. & Krijnen, G.https://doi.org/10.1109/JSEN.2024.3429630
2023
Thermal Resistivity of FFF Printed Carbon Black Doped Polymers (2023)In 2023 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS). IEEE. Jonkers, H., Kosmas, D., Schmitz, J. & Krijnen, G.https://doi.org/10.1109/FLEPS57599.2023.10220388Characterization of Electrical Properties of Direct Ink Written Silver Ink (2023)[Contribution to conference › Paper] Sensor and Measurement Science International Conference, SMSI 2023 (Accepted/In press). Jonkers, H., Idzenga, J., Kosmas, D. & Krijnen, G.https://doi.org/10.5162/SMSI2023/P68
2022
Evaluation of a 3D Printed Soft Sensor for Measuring Fingertip Interaction Forces (2022)IEEE sensors journal, 22(12), 11499-11508. Wolterink, G., Kosmas, D., Schouten, M., Beijnum, B.-J. F. v., Veltink, P. H. & Krijnen, G.https://doi.org/10.1109/JSEN.2022.3171712
2021
Development of a 3D Printed Gap Gauge with Embedded Force Sensor for Balancing Unicompartmental Knee Arthroplasty (2021)In 2021 IEEE Sensors. Article 9639727 (IEEE Sensors; Vol. 2021). IEEE. Kosmas, D., Schouten, M., Krijnen, G., Abayazid, M. & van Jonbergen, H.-P.https://doi.org/10.1109/SENSORS47087.2021.96397273D printed capacitive shear and normal force sensor using a highly flexible dielectric (2021)In 2021 IEEE Sensors Applications Symposium (SAS). IEEE. Schouten, M., Spaan, C., Kosmas, D., Sanders, R. G. P. & Krijnen, G.https://doi.org/10.1109/SAS51076.2021.9530032A Review of Extrusion-Based 3D Printing for the Fabrication of Electro- and Biomechanical Sensors (2021)IEEE sensors journal, 21(11), 12900-12912. Schouten, M., Wolterink, G., Dijkshoorn, A., Kosmas, D., Stramigioli, S. & Krijnen, G.https://doi.org/10.1109/JSEN.2020.3042436
2020
Hysteresis Compensation of 3D Printed Sensors Using a Power Law Model for Various Input Signals (2020)In 2020 IEEE Sensors. Article 9278942. IEEE. Schouten, M., Kosmas, D. & Krijnen, G.https://doi.org/10.1109/SENSORS47125.2020.9278942Hysteresis Compensation of 3D Printed Sensors by a Power Law Model with Reduced Parameters (2020)In 2020 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS). IEEE. Kosmas, D., Schouten, M. & Krijnen, G.https://doi.org/10.1109/FLEPS49123.2020.9239580
Research profiles
Address
University of Twente
Carré (building no. 15), room C3714
Hallenweg 23
7522 NH Enschede
Netherlands
University of Twente
Carré (building no. 15)
Hallenweg 23
7522 NH Enschede
Netherlands
University of Twente
Carré C3714
P.O. Box 217
7500 AE Enschede
Netherlands
Scan the QR code or