Welcome...

prof.dr. A.J.A. Winnubst (Louis)

Associate Professor

About Me

My research activities are in the field of ceramic processing for the development of new inorganic membranes and the characterization of its microstructural and transport properties. Examples are polymer-functionalized ceramic membranes for solvent nanofiltration and sol-gel derived or zeolitic membranes for gas separation.

I am adjunct visiting professor at the University of Science and Technology of China (USTC), Hefei, Anhui, P.R. China.

Besides, I am China country coordinator for the University of Twente

Expertise

Membranes
Membranes
Membranes
Alumina
Aluminum Oxide
Membranes
Silica
Silicon Dioxide

Publications

Other Contributions

Publications in International (refereed) Journals

  1. “Growing to shrink: nano-tunable polystyrene brushes inside 5 nm mesopores” Renaud B. Merlet, Mohammad Amirilargani, Louis C.P.M. de Smet, Ernst J.R. Sudhölter, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 572 (2019) 632-640

  2. “From amorphous to crystalline: Transformation of silica membranes into silicalite-1 (MFI) zeolite layers”, Pelin Karakiliç, Ryo Toyoda, Freek Kapteijn, Arian Nijmeijer and Louis Winnubst, Microporous and Mesoporous Materials, 276 (2019) 52-51

  3. “Poly (maleic anhydride-alt-1-alkenes) directly grafted to γ-alumina for high-performance organic solvent nanofiltration membranes”, Mohammad Amirilargani, Renaud B. Merlet, Arian Nijmeijer, Louis Winnubst, Louis C.P.M. de Smet and Ernst J.R. Sudhölter, Journal of Membrane Science, 564 (2018) 259-266

  4. “One-Pot Synthesis of High-Flux b-Oriented MFI Zeolite Membranes for Xe Recovery”, Xuerui Wang, Pelin Karakiliç, Xinlei Liu, Meixia Shan, Arian Nijmeijer, Louis Winnubst, Jorge Gascon and Freek Kapteijn, ACS Applied Materials & Interfaces 10 (2018), 33574-33580

  5. “Uniformly Oriented Zeolite ZSM5 Membranes with Tunable Wettability on a Porous Ceramic”, Donglong Fu, Joel Schmidt, Paul Pletcher, Pelin Karakiliç, Xinwei Ye, Carolien Vis, Pieter Bruijnincx, Matthias Filez, Laurens Mandemaker, Louis Winnubst and Bert Marc Weckhuysen, Angewandte Chemie, International Edition, 57 (2018) 12458-12462

  6. “Micropore structure stabilization in organosilica membranes by gaseous catalyst post-treatment”, A. Petra Dral, Ernst R.H. van Eck, Louis Winnubst and Johan E. ten Elshof, Journal of Membrane Science, 548 (2018) 157–164

  7. “Sol-gel processed magnesium-doped silica membranes with improved H2/CO2 separation”, Pelin Karakiliç, Cindy Huiskes, Mieke W.J. Luiten-Olieman, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 543 (2017) 195-201

  8. “Interpreting rejection in SRNF across grafted ceramic membranes through the Spiegler-Kedem model”, Renaud B. Merlet, Cheryl R. Tanardi, Ivo. F.J. Vankelecom, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 525 (2017) [1] 359-367

  9. “Hydrothermal stability of silica, hybrid silica and Zr-doped hybrid silica membranes”, Marcel ten Hove, Mieke W.J. Luiten-Olieman, Cindy Huiskes, Arian Nijmeijer and Louis Winnubst, Separation and Purification Technology, 189 (2017) 46-53

  10. “Engineering durable hydrophobic surfaces on porous alumina ceramics using in-situ formed inorganic-organic hybrid nanoparticles”, Jianqiang Gu, Junwei Wang, Yanan Li Xin Xu, Chusheng Chen and Louis Winnubst, Journal of the European Ceramic Society, 37 (2017) 4843-4848

  11. “Influence of the intermediate layer on the hydrothermal stability of sol-gel derived hybrid silica membranes”, Marcel ten Hove, Mieke W.J. Luiten-Olieman, Cindy Huiskes, Arian Nijmeijer and Louis Winnubst, Journal of the European Ceramic Society, 37 [10] (2017) 3435-3441

  12. “Enhanced water desalination performance through hierarchically-structured ceramic membranes”, Tong Liu, Libin Lei, Jianqiang Gu, Yao Wang, Louis Winnubst, Chusheng Chen, Chunsong Ye and Fanglin Chen, Journal of the European Ceramic Society, 37 (2017) 2431-2438

  13. “Long-term flexibility-based structural evolution and condensation in microporous organosilica membranes for gas separation”, A. Petra Dral, Kristianne Tempelman, Emiel J. Kappert, Louis Winnubst, Nieck E. Benes and Johan E. ten Elshof, Journal of Materials Chemistry A, 5 (2017) 1268-1281

  14. “Coupled-PDMS grafted mesoporous γ-alumina membranes for solvent nanofiltration”, Cheryl R. Tanardi, Arian Nijmeijer and Louis Winnubst, Separation and Purification Technology, 169 (2016) 223-229

  15. “Polyethyleneglycol grafting of γ-alumina membranes for solvent resistant nanofiltration”, Cheryl R. Tanardi, Romina Catana, Mihai Barboiu, André Ayral, Ivo F.J. Vankelecom, Arian Nijmeijer and Louis Winnubst, Microporous and Mesoporous Materials, 229 (2016) 106-116

  16. “Preparation of alumina membranes comprising a thin separation layer and a support with straight open pores for water desalination”, Jianqiang Gu, Chunlei Ren, Xu Zong, Chusheng Chen and Louis Winnubst, Ceramics International, 42 (2016) 12427-12434

  17.  “Chemical modification/grafting of mesoporous alumina with polydimethylsiloxane (PDMS)”, Ana F.M. Pinheiro, Arian Nijmeijer, Venkata G.P. Sripathi and Louis Winnubst, European Journal of Chemistry, 6 (2015) 287-295

  18. “Solvent permeation behavior of PDMS grafted γ-alumina membranes”, Cheryl R. Tanardi, Ivo F.J. Vankelecom, Ana F.M. Pinheiro, Kishore K.R. Tetala, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 495 (2015) 216-225

  19. “Membrane-integrated oxy-fuel combustion of coal: Process design and simulation”, Wei Chen, Louis van der Ham, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 492 (2015) 461-470

  20. “Auto-combustion synthesis of perovskite-type oxides SrTi1−xFexO3−δ”, S.F.P. ten Donkelaar, R. Ruhl, S.A. Veldhuis, A. Nijmeijer, L. Winnubst, H.J.M. Bouwmeester, Ceramics International, 41 (2015) 13709-13715

  21.  “Facile synthesis of zirconia doped hybrid organic inorganic silica membranes”, Marcel ten Hove, Arian Nijmeijer and Louis Winnubst, Separation and Purification Technology, 147 (2015) 372-378

  22. “An accurate way to determine the ionic conductivity of mixed ionic–electronic conducting (MIEC) ceramics”, Wei Chen, Nicolas Nauels, Henny J.M. Bouwmeester, Arian Nijmeijer and Louis Winnubst, Journal of the European Ceramic Society 35 (2015) [11] 3075-3083

  23. “Hybrid silica membranes with enhanced hydrogen and CO2 separation properties”, Hessel L. Castricum, Hammad F. Qureshi, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 488 (2015) 121-128

  24. “Doped microporous hybrid silica membranes for gas separation”, Hammad F. Qureshi, Rogier Besselink, Johan E. ten Elshof, Arian Nijmeijer and Louis Winnubst, Journal of Sol-Gel Science and Technology, 75 (2015) [1] 180-188

  25. “A novel malonamide bridged silsesquioxane precursor for enhanced dispersion of transition metal ions in hybrid silica membranes”, Rogier Besselink, Hammad F. Qureshi, Louis Winnubst and Johan E. ten Elshof, Micro and Mesoporous Materials, 214 (2015) 45-53

  26. “Preparation and characterization of hydrophobic alumina planar membranes for water desalination”, Chunlei Ren, Hong Fang, Jianqiang Gu, Louis Winnubst and Chusheng Chen, Journal of the European Ceramic Society, 35 (2015) 723-730

  27. “Waste-to-resource preparation of a porous ceramic membrane support featuring elongated mullite whiskers with enhanced porosity and permeance”, Li Zhu, Yingchao Dong, Stuart Hampshire, Sophie Cerneaux and Louis Winnubst, Journal of the European Ceramic Society, 35 (2015) 711-721

  28. “Modeling water flux and salt rejection of mesoporous γ-alumina and microporous organosilica membranes”, Ali Farsi, Vittorio Boffa, Hammad F. Qureshi, Arian Nijmeijer, Louis Winnubst and Morten Lykkegaard Christensen, Journal of Membrane Science, 470 (2014) 307-315

  29. “PDMS grafting of mesoporous γ-alumina membranes for nanofiltration of organic solvents”, Cheryl R. Tanardi, Ana F.M. Pinheiro, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 469 (2014) 471-477

  30. “Oxygen-selective membranes integrated with oxy-fuel combustion”, Wei Chen, Chu-sheng Chen, Henny Bouwmeester, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 463 (2014) 166-172

  31. “Development of a PDMS-grafted alumina membrane and its evaluation as solvent resistant nanofiltration membrane”, Ana F.M. Pinheiro, Danny Hoogendoorn, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 463 (2014) 24-32

  32. “Phase-inversion tape casting and oxygen permeation properties of supported ceramic membranes”, Wei He, Hua Huang, Jian-fen Gao, Louis Winnubst and Chu-sheng Chen, Journal of Membrane Science, 452 (2014) 294-299

  33. “Preparation and electrical properties of Ni0.6Mn2.4-xSnxO4 NTC ceramics”, Zhongbing Wang, Zhenbo Li, Yi Zhang, Ruyian Zhang, Pan Qin, Chunnian Chen and Louis Winnubst, Ceramics International, 40 (2014) 4875-4878

  34. “Influence of sol–gel process parameters on the microstructure and performance of hybrid silica membranes”, Hammad F. Qureshi, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 446 (2013) 19-25

  35. “Phase-inversion tape casting and synchrotron-radiation computed tomography analysis of porous alumina”, Hong Fang, Chunlei Ren, Yaoge Liu, Detang Lu, Louis Winnubst and Chu-sheng Chen, Journal of the European Ceramic Society, 33 (2013) 2049-205

  36. “Open source powder based rapid prototyping machine for ceramics”, A. Budding, T.H.J. Vaneker and L. Winnubst, Procedia, 6 (2013) 533-538

  37. “Oxygen non-stoichiometry determination of perovskite materials by a carbonation process”, Wei Chen, Arian Nijmeijer and Louis Winnubst, Solid State Ionics, 229 (2012) 54-58

  38. “Applying ceramic nanoporous microneedle arrays as a transport interface in egg plants and an ex-vivo human skin model”, Michel Verhoeven, Svetlana Bystrova, Louis Winnubst, Hammad F. Qureshi, Tanja D. de Gruijl, Rik J. Scheper and Regina Luttge, Microelectronic Engineering 98 (2012) 659-662

  39. “Effect of temperature on friction and wear behaviour of CuO–zirconia composites”, Mahdiar Valefi, Matthijn de Rooij, Dirk J. Schipper and Louis Winnubst, Journal of the European Ceramic Society, 32 [12] (2012) 2235-2242

  40. “Towards a generic method for inorganic porous hollow fibers preparation with shrinkage-controlled small radial dimensions, applied to Al2O3, Ni, SiC, stainless steel, and YSZ”, Mieke W.J. Luiten-Olieman, Michiel J.T. Raaijmakers, Louis Winnubst, Ton C. Bor, Matthias Wessling, Arian Nijmeijer and Nieck E. Benes, Journal of Membrane Science, 407-408 (2012) 155-163

  41. “Production and characterization of micro- and nano-features in biomedical alumina and zirconia ceramics using a tape casting route”, Maciej Domanski, Louis Winnubst, Regina Luttge, Edwin Lamers, X. Frank Walboomers, John Jansen and Han Gardeniers, Journal of Materials Science: Materials in Medicine, 23 [7] (2012) 1637-1444

  42. “Processing and in vivo evaluation of multiphasic calcium phosphate cements with dual tricalcium phosphate phases”, Marco A. Lopez-Heredia, Matilde Bongio, Marc Bohner, Vincent Cuijpers, Louis Winnubst, Natasja van Dijk, Joop G.C. Wolke, Jeroen J.J.P. van den Beucken and John A. Jansen, Acta Biomaterialia, 8 (2012) 3500-3508  

  43. “Non-glycosylated BMP-2 can induce ectopic bone formation at lower concentrations compared to glycosylated BMP-2”, F.C.J. van de Watering, J.J.J.P. van den Beucken, S.P. van der Woning, A. Briest, A. Eek, H. Qureshi, L. Winnubst, O.C. Boerman and J.A. Jansen, Journal of Controlled Release, 159 (2012) 69-77

  44. “In vitro and in vivo evaluation of the inflammatory response to nanoscale grooved substrates”, Edwin Lamers, X. Frank Walboomers, Maciej Domanski, Ljupcho Prodanov, Jacoline Melis, Regina Luttge, Louis Winnubst, James M. Anderson, Han J.G.E. Gardeniers, and John A. Jansen, Nanomedicine: Nanotechnology, Biology and Medicine, 8 (2012) 308-317

  45. “The effect of an alumina counterface on friction reduction of CuO/3Y-TZP composite at room temperature”, Jiupeng Song, Mahdiar Valefi, Matthijn de Rooij, Dirk J. Schipper and Louis Winnubst, Wear, 274-275 (2012) 75-83

  46. “Submicron-patterning of bulk titanium by nanoimprint lithography and reactive ion etching”, M. Domanski, R. Luttge, E. Lamers, X.F. Walboomers, L. Winnubst, J.A. Jansen and J.G.E. Gardeniers, Nanotechnology 23 [6] (2012) 065306 (12pp)

  47. “High-temperature tribological and self-lubricating behavior of copper oxide-doped Y-TZP composite sliding against alumina”, Mahdiar Valefi, Matthijn de Rooij, Dirk J. Schipper and Louis Winnubst, Journal of the American Ceramic Society, 94 [12] (2011) 4426-4434

  48. “Ta-doped SrCo0.8 Fe0.2O3-δ membranes: Phase stability and oxygen permeation in CO2 atmosphere”, Wei Chen, Chusheng Chen and Louis Winnubst, Solid State Ionics, 196 [1] (2011) 30-33

  49. Porous stainless steel hollow fibers with shrinkage-controlled small radial dimensions”, Mieke W.J. Luiten-Olieman, Michiel J.T. Raaijmakers, Louis Winnubst, Matthias Wessling, Arian Nijmeijer and Nieck E. Benes, Scripta Materialia, 65 [1] (2011) 25-28

  50. Effect of microstructure and catalyst coating on the oxygen permeability of a novel CO2-resistant composite membrane”, Shumin Fang, Chusheng Chen and Louis Winnubst, Solid State Ionics, 190 (2011) 46-52

  51. “The effect of ball milling grinding pathways on the bulk and reactivity properties of calcium phosphate cements”, M. A. Lopez-Heredia, M. Bohner, W. Zhou, A. J. A. Winnubst, J. G. C. Wolke and J. A. Jansen, Journal of Biomedical Materials Research - Part B: Applied Biomaterials, 98B (2011) 68-79

  52. “Composite capillary membrane for solvent resistant nanofiltration”, S.M. Dutczak, M.W.J. Luiten-Olieman, H.J. Zwijnenberg, L.A.M. Bolhuis-Versteeg, L. Winnubst, M.A. Hempenius, N.E. Benes, M. Wessling and D. Stamatialis, Journal of Membrane Science, 372 [1-2] (2011) 182-190

  53. “Porous stainless steel hollow fiber membranes via dry-wet spinning”, Mieke W.J. Luiten-Olieman, Louis Winnubst, Arian Nijmeijer, Matthias Wessling and Nieck E. Benes, Journal of Membrane Science, 370 [1-2] (2011) 124-130

  54. “Manipulation of sintering behavior by initial freeze pressing an aqueous alumina suspension”, Jumeng Zheng, Louis Winnubst, Velianti, Shumin Fang and David Salamon, Advanced Engineering Materials, 13 [1-2] (2011) 77-81

  55. Effect of Zr4+ doping on the oxygen stoichiometry and phase stability of SrCo0.8Fe0.2O3δ oxygen separation membrane”, W. Chen, Y.B. Zuo, C.S. Chen and A.J.A. Winnubst, Solid State Ionics, 181 (2010) 971-975

  56. “Ceramic microfluidic monoliths by ice templating”, Jumeng Zheng, David Salamon, Leon Lefferts, Matthias Wessling and Louis Winnubst, Microporous and Mesoporous Materials 134 (2010) 216-219

  57. “Synthesis and characteristics of 3Y-TZP and CuO powders for ceramic composites”, Louis Winnubst, Peter J. de Veen, Shen Ran and Dave H.A. Blank, Ceramics International, 36 (2010) 847-853

  58. “Effect of TiO2 doping on the characteristics of macroporous Al2O3/TiO2 membrane supports”, Hong Qi, Yiqun Fan, Weihong Xing and Louis Winnubst, Journal of the European Ceramic Society, 30 [6] (2010) 1317-1325

  59. Manipulating microstructure and mechanical properties of CuO doped 3Y-TZP nano-ceramics using spark-plasma sintering”, Shen Ran, Jozef Vleugels, Shuigen Huang, Kim Vanmeensel, Dave H.A. Blank and Louis Winnubst, Journal of the European Ceramic Society, 30 [4] (2010) 899-904

  60. “Cryo dualbeam focused ion beam-scanning electron microscopy to evaluate the interface between cells and nanopatterned scaffolds”, E. Lamers, X. F. Walboomers, M. Domanski, G. McKerr, B.M. O’Hagan, C.A. Barnes, L. Peto, R. Lüttge, L. Winnubst, H.G.J. Gardeniers and J. A. Jansen, Tissue Engineering-Part C: Methods 17 [1] (2010) 1-7

  61. “The influence of nanoscale grooved substrate on osteoblast behavior and extracellular matrix deposition”, Edwin Lamers, X. Frank Walboomers, Maciej Domanski, Joost te Riet, Falco van Delft, Regina Luttge, Louis Winnubst, Han Gardeniers and John A. Jansen, Biomaterials 31 (2010) 3307-3316

  62. “A generic method for inorganic porous hollow fibers preparation with shrinkage-controlled small radial dimensions”, M.W.J. Luiten-Olieman, L. Winnubst, T. Bor, M. Wessling, A. Nijmeijer and N.E. Benes, Procedia Engineering 44 (2012) 644-645

  63.  “A novel method for the fabrication of freestanding PZT features on substrates”, Joost G. van Bennekom, Louis Winnubst, Wietze Nijdam, Matthias Wessling and Rob G.H. Lammertink, Journal of the European Ceramic Society, 29 [15] (2009) 3227-3233

  64. “Dry-sliding self-lubricating ceramics: CuO doped 3Y-TZP”, Shen Ran, Louis Winnubst, Dave H.A. Blank, Henry R. Pasaribu, Jan-Willem Sloetjes and Dik J. Schipper, Wear, ­267 (2009) 1696-1701

  65. Analysis of reactions during sintering of CuO-doped 3Y-TZP nano-powder composites”, Louis Winnubst, Shen Ran, Emiel A. Speets and Dave H.A. Blank, Journal of the European Ceramic Society, 29 [12] (2009) 2549-2557

  66. Aging of nickel manganite NTC ceramics”, Dao-lai Fang, Cui-hong Zeng, Chu-sheng Chen and A.J.A. Winnubst, Journal of Electroceramics, 22 (2009) 421-427

  67.  “Effects of Cu and Zn co-doping on the electrical properties of Ni0.5Mn2.5O NTC ceramics”, Chunhua Zhao, Biyun Wang, Pinghua Yang, Louis Winnubst and Chusheng Chen, Journal of the European Ceramic Society, 28 [1] (2008) 35-40

  68. Preparation and electrical properties of FexCu0.10Ni0.66Mn2.24−xO4 (0 ≤ x ≤ 0.90) NTC ceramics” Dao-lai Fang, Chu-sheng Chen and A.J.A. Winnubst, Journal of Alloys and Compounds, 454 [1-2] (2008) 286-291

  69.  “Effect of microstructure on the tribological and mechanical properties of CuO-doped 3Y-YZP ceramics”, Shen Ran, Louis Winnubst, Dave H. A. Blank, Henry R. Pasaribu, Jan-Willem Sloetjes and Dik J. Schipper, Journal of the American Ceramic Society, 90 [9] (2007) 2747-2752

  70. “Sintering behaviour and microstructure of 3Y-TZP + 8 mol% CuO nano-powder composite”, S. Ran, A.J.A. Winnubst, H. Koster, P. de Veen and D.H.A. Blank, Journal of the European Ceramic Society, 27 [2-3] (2007) 683-687

  71. Stability and oxygen permeation behavior of Ce0.8Sm0.2O2−δ–La0.8Sr0.2CrO3−δ composite membrane under large oxygen partial pressure gradients”, Bo Wang, Jianxin Yi, Louis Winnubst and Chusheng Chen, Journal of Membrane Science, 286 [1-2] (2006) 22-25

  72. “Effect of annealing in O2 or N2 on the aging of Fe0.5Mn1.84Ni0.66O4 NTC-ceramics”, Zhongbing Wang, Chunhua Zhao, Pinghua Yang, Louis Winnubst and Chusheng Chen, Solid State Ionics, 177 [19-25] (2006) 2191-2194

  73. “Oxygen permeation through a Ce0.8Sm0.2O2−δ–La0.8Sr0.2CrO3−δ dual-phase composite membrane”, Jianxin Yi, Yanbo Zuo, Wei Liu, Louis Winnubst and Chusheng Chen, Journal of Membrane Science, 280 [1-2] (2006) 849-855

  74. “X-ray diffraction and infrared studies of FexMn2.34-xNi0.66O4 (0<x<1) NTC ceramics”, Zhongbing Wang, Chunhua Zhao, Pinghua Yang, A.J.A. Winnubst, Chusheng Chen, Journal of the European Ceramic Society, 26 [13] (2006) 2833-2837

  75. Synthesis, sintering and microstructure of 3Y-TZP/CuO nano-powder composites”, Shen Ran, Louis Winnubst, Wika Wiratha and Dave H.A. Blank, Journal of the European Ceramic Society, 26 [4-5] (2006) 391-396

  76. Preparation of Ultra-Fine Nickel Manganite Powders and Ceramics by a Solid-State Coordination Reaction”, Dao-lai Fang, Zhong-bing Wang, Ping-hua Yang, Wei Liu, Chu-sheng Chen and A.J.A. Winnubst, Journal of the American Ceramic Society, 89 [1] (2006) 230-235

  77. “Sintering Behavior of 0.8 mol%-CuO-Doped 3Y-TZP Ceramics”, Shen Ran, Louis Winnubst, Wika Wiratha and Dave H.A. Blank, Journal of the American Ceramic Society, 89 [1] (2006) 151-155

  78. “Environmental effects on friction and wear of dry sliding zirconia and alumina ceramics doped with copper oxide”, H.R. Pasaribu, K.M. Reuver, D.J. Schipper, S. Ran. K.W. Wiratha, A.J.A. Winnubst and D.H.A. Blank, International Journal of Refractory Metals and Hard Materials, 23 (2005) 386 - 390

  79. “Research and education on inorganic and ceramic materials in the Netherlands”, H.T. Hintzen and A.J.A. Winnubst, J. Soc. Inorg. Mater. Japan, 12 (2005) 222-231

  80. “Friction and wear studies on nylon-6/SiO2 nanocomposites”, Monserrat Garcia, Matthijn de Rooij, Louis Winnubst, Werner E. van Zyl and H. Verweij, Journal of Applied Polymer Science, 92 [3] (2004) 1855 -186

  81. “Friction behaviour of solid oxide lubricants as second phase in a-Al2O3 and Stabilized ZrO2 composites” Bas Kerkwijk, Monserat Garcia, Werner E. van Zyl, Louis Winnubst, Elmer J. Mulder, Dik J. Schipper and Henk Verweij, Wear, 256 (2004) 182 -189

  82. “A wear-resistant zirconia ceramic for low friction application”, A.J.A. Winnubst, S. Ran, K.W. Wiratha, D.H.A. Blank, H.R. Pasaribu, J-W. Sloetjes and D.J. Schipper, Key Engineering Materials 264-268 (2004) 809-812

  83. “Densification of zirconia-hematite nanopowders”, T.P. Raming, A.J.A. Winnubst, W.E. van Zyl and H. Verweij, Journal of the European Ceramic Society, 23 [7] (2003) 1053-1060

  84. “Electrochemical characterisation of 3Y-TZP-Fe2O3 composites” B.A. Boukamp, T.P. Raming, A.J.A. Winnubst and H. Verweij, Solid State Ionics, 158 (2003) 381-394

  85. “The synthesis and characterisation of mixed Y2O3-doped ZrO2 and a-Fe2O3 nanosized powders” T.P. Raming, A.J.A. Winnubst and H. Verweij, Journal of Materials Chemistry, 12 (2002) 3705 – 3711

  86. “The synthesis and magnetic properties of nanosized hematite (a-Fe2O3) particles” T.P. Raming, A.J.A. Winnubst, C.M. van Kats and A.P. Philipse, Journal of Colloid and Interface Science, 249 (2002) 346-350

  87. “Synthesis and characterisation of dual-phase Y-TZP and RuO2 nanopowders: dense electrode precursors”, Werner E. van Zyl, Louis Winnubst, Tomas P. Raming, Riaan Schmuhl and Henk Verweij, Journal of Materials Chemistry, 12 [3] (2002) 708-713

  88. “Analysis of In-doped CaZrO3 using a peroxo-oxalate complexation method”, Leen van Rij, Louis Winnubst, Le Jun and Joop Schoonman, Journal of Materials Chemistry, 10 [11] (2000) 2515-2521

  89. “Processing of homogeneous zirconia-toughened alumina ceramics with high dry-sliding wear resistance”, Bas Kerkwijk, Louis Winnubst, Elmer J. Mulder and Henk Verweij, Journal of the American Ceramic Society, 82 [8] (1999) 2087-2093

  90. “Preparation of BaTiO3 by homogeneous precipitation” S. van der Gijp, M.H.J. Emond, A.J.A. Winnubst and H.Verweij, Journal of the European Ceramic Society, 19 (1999) 1683-1690

  91. “Peroxo-oxalate preparation of doped barium titanate”, Sven van der Gijp, Louis Winnubst and Henk Verweij, Journal of the American Ceramic Society, 82 [5] (1999) 1175-1180

  92. “Tribological properties of nanoscale alumina-zirconia composites” B. Kerkwijk, A.J.A. Winnubst, H. Verweij, W.J. Mulder, H.S.C. Metselaar, and D.J. Schipper, Wear, 225-229 (1999) 1293-1302

  93. “Thermally induced wear of ceramics” H.S.C. Metselaar, A.J.A. Winnubst and D.J. Schipper, Wear, 225-229 (1999) 857 – 861

  94. "Superplastic deep drawing of tetragonal zirconia ceramics at 1160°C", A.J.A. Winnubst and M.M.R. Boutz, Journal of the European Ceramic Society, 18 (1998) 2101-06

  95. “Sintering and densification; new techniques: sinter forging” A.J.A. Winnubst and M.M.R. Boutz, pp. 301-323 in: Key Engineering Materials, vols. 153-154, Zirconia Engineering Ceramics, Ed. by E. Kisi, Trans Tech Publications (Zürich, Switzerland) ISBN 0-87849-793-5, (1998) 

  96. “Preparation of La0.3Sr0.7CoO3-δ perovskite by thermal decomposition of metal-EDTA complexes", R.H.E. van Doorn, H. Kruidhof, A. Nijmeijer, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Chemistry, 8 [9] (1998) 2109-12

  97. "An oxalate-peroxide complex used in the preparation of doped barium titanate", S. van der Gijp, A.J.A. Winnubst and H. Verweij, Journal of Materials Chemistry, 8 [5] (1998) 1251-54

  98. “Effects of grain size and ceria addition on ageing behaviour and tribological properties of Y-TZP ceramics”, S.R. Jansen, A.J.A. Winnubst, Y.J. He, H. Verweij P.G.T. van der Varst and G. de With, Journal of the European Ceramic Society, 18 (1998) 557 – 553

  99. “Effects of a second phase on the tribological properties of Al2O3 and ZrO2 ceramics”, Y.J.He, A.J.A. Winnubst, D.J. Schipper, A.J. Burggraaf and H. Verweij, Wear, 210 (1997) 178-187

  100. “Sliding wear of ZrO2 - Al2O3 composite ceramics”, Y.J. He, A.J.A. Winnubst, A.J. Burggraaf, H. Verweij, P.G.T. van der Varst and G. de  With, Journal of the European Ceramic Society, 17 (1997) 1371-1380

  101. Influence of porosity on friction and wear of tetragonal zirconia polycrystals”, Yingjie He, Louis Winnubst, Antonie J. Burggraaf, Henk Verweij, Paul G.Th. van der Varst and Bert de With, Journal of the American Ceramic Society, 80 [2] (1997) 377-80

  102. “Grain growth in ultra-fine grained Y-TZP ceramics”, C.D. Sagel-Ransijn, A.J.A. Winnubst, A.J. Burggraaf and H. Verweij, Journal of the European Ceramic Society, 17 (1997) 1133-141

  103. “Production of defect-poor nanostructured ceramics of yttria-zirconia”, C.D. Sagel-Ransijn, A.J.A. Winnubst, B. Kerkwijk, A.J. Burggraaf and H. Verweij, Journal of the European Ceramic Society, 17 (1997) 831-841

  104. “Plasticity of nanocrystalline zirconia ceramics and composites”, A.J.A. Winnubst, M.M.R. Boutz, Y.J. He, A.J. Burggraaf and H. Verweij, Ceramics International, 23 (1997) 215-221

  105. “Zirconia-toughened alumina (ZTA) with improved homogeneity for tribological applications”, B. Kerkwijk, A.J.A. Winnubst, A.F. Stassen and H. Verweij, Key Engineering Materials, 132-136 (1997) 297-300

  106. “Wet chemical preparation of doped barium titanate powders and ceramics”, S. van der Gijp, A.J.A. Winnubst and H. Verweij, Key Engineering Materials, 132-136 (1997) 77-80

  107. “Grain-size dependence of sliding wear in tetragonal zirconia polycrystals”, Yingjie He, Louis Winnubst, Antonie J. Burggraaf, Henk Verweij, Paul G.Th. van der Varst and Bert de With, Journal of the American Ceramic Society, 79 (1996) 3090-3096

  108. "Enhanced mechanical properties by grain boundary strengthening in ultra-fine-grained TZP ceramics", Y.J. He, A.J.A. Winnubst, C.D. Sagel-Ransijn, A.J. Burggraaf and H. Verweij, Journal of the European Ceramic Society, 16 [6] (1996) 601-612

  109. ”The influence of crystallisation and washing medium on the characteristics of nanocrystalline Y-TZP”, C.D. Sagel-Ransijn, A.J.A. Winnubst, H. Verweij and A.J. Burggraaf, Journal of the European Ceramic Society, 16 (1996) 759-766

  110. "The effect of ceria co-doping on chemical stability and fracture toughness of Y-TZP", M.M.R. Boutz, A.J.A. Winnubst, B. van Langerak, R.J.M. Olde Scholtenhuis, K. Kreuwel and A.J. Burggraaf, Journal of Materials Science, 30 (1995) 1854-1862

  111. "Friction and wear behaviour of ceramic-hardened steel couples under reciprocating sliding motion", Y.J. He, A.J.A. Winnubst, D.J. Schipper, P.M.V. Bakker, A.J. Burggraaf and H. Verweij, Wear, 184 (1995) 33-43

  112. "Microstructural development, electrical properties and oxygen permeation of zirconia-palladium composites", C.S. Chen, B.A. Boukamp, H.J.M. Bouwmeester, G.Z. Cao, H. Kruidhof, A.J.A. Winnubst and A.J. Burggraaf, Solid State Ionics, 76  [1-2] (1995) 23-28,

  113. "Low-temperature sinter forging of nanostructured Y-TZP and YCe-TZP", Michel M.R. Boutz, Louis Winnubst, Antonie J. Burggraaf, Marco Nauer and Claude Carry, Journal of the American Ceramic Society, 78 (1995) 121-128

  114. "Sinter forging of zirconia toughened alumina", Y.J. He, A.J.A. Winnubst, H. Verweij and A.J. Burggraaf, Journal of Materials Science, 29 (1994) 6505-6512

  115. "Improvement of mechanical properties of zirconia-toughened alumina by sinter forging", Y.J. He, A.J.A. Winnubst, H. Verweij and A.J. Burggraaf, Journal of Materials Science, 29 (1994) 5868-5874

  116. "Characterization of grain boundaries in superplastically deformed Y-TZP ceramics", Michel M.R. Boutz, Chusheng Chen, Louis Winnubst and Antonie J. Burggraaf, Journal of the American Ceramic Society, 77 (1994) 2632‑2640

  117. "Effect of additives on densification and deformation of tetragonal zirconia", M.M.R. Boutz, A.J.A. Winnubst, F. Hartgers and A.J. Burggraaf, Journal of Materials Science, 29 (1994) 5374-5382

  118. "Effect of calcination on the sintering of gel-derived zirconia-toughened alumina", Peter den Exter, Louis Winnubst, Theo H.P. Leuwerink and Antonie J. Burggraaf, Journal of the American Ceramic Society, 77 [9] (1994) 2376-2380

  119. "Low temperature superplastic flow of yttria stabilized tetragonal zirconia polycrystals", M.M.R. Boutz, A.J.A. Winnubst, A.J. Burggraaf, M. Nauer and C. Carry, Journal of the European Ceramic Society, 13 (1994) 103-111

  120. "Yttria-ceria stabilized tetragonal zirconia polycrystals: Sintering, grain growth and grain boundary segregation", M.M.R. Boutz, A.J.A. Winnubst and A.J. Burggraaf, Journal of the European Ceramic Society, 13 (1994) 89-102

  121. "A hydrothermal route for production of dense, nanostructured Y-TZP", M.M.R. Boutz, R.J.M. Olde Scholtenhuis, A.J.A. Winnubst and A.J. Burggraaf, Materials Research Bulletin, 29 (1994) 31-40

  122. "Thermal stability of nanostructured titania and titania-ceria  ceramic powders prepared by the sol-gel process", G.W. Koebrugge, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Chemistry, 3 (1993) 1095-1100

  123. "The electrical characterization of grain boundaries in ultra-fine grained Y-TZP", C.S. Chen, M.M.R. Boutz, B.A. Boukamp, A.J.A. Winnubst, K.J. de Vries and A.J. Burggraaf, Materials Science and Engineering A: Structural materials, 168 (1993) 231-234

  124. "The preparation and characterization of Y-TZP/20 wt.% alumina", P. den Exter, A.J.A. Winnubst and A.J. Burggraaf, Journal of the European Ceramic Society, 11 (1993) 497-507

  125. "Sintering kinetics and microstructure development of nanoscale Y-TZP ceramics", G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, Journal of the European Ceramic Society, 11 (1993) 315-324

  126. "Surface and grain boundary analysis of doped zirconia ceramics studied by AES and XPS", G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Science, 27 (1992) 5057

  127. "Mechanical properties of ultra-fine grained zirconia ceramics", G.S.A.M. Theunissen, J.S. Bouma, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Science, 27 (1992) 4429

  128. "Effect of dopants on the sintering behaviour and stability of tetragonal zirconia ceramics", G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf,Journal of the European Ceramic Society, 9 (1992) 251

  129. "Low temperature superplastic flow of yttria stabilized tetragonal zirconia polycrystals" M.M.R. Boutz, A.J.A. Winnubst, A.J. Burggraaf, M. Nauer and C. Carry, pp. 939-943 in Euro-Ceramics II, vol. 2, ed. by G. Ziegler and H. Hausner, Deutsche Keramische Gesellschaft e.V. (Köln) 1991.

  130. "Sintering of ZTA at low temperatures through transition alumina densification" P. den Exter, A.J.A. Winnubst and A.J. Burggraaf, pp. 1377-1381 in Euro-Ceramics II, vol. 2, ed. by G. Ziegler and H. Hausner, Deutsche Keramische Gesellschaft e.V. (Köln) 1991.

  131. "The influence of MgO on the microstructure during sintering of fine-grained alumina and zirconia/alumina composite", A. Bos, P.J.M. Grefte, P. den Exter, A.J.A. Winnubst, E.B.M. Doesburg, A.J. Burggraaf and H.J. Veringa, Science of Sintering, 23 (1991) 19-24

  132. "Porous and dense nanophase ceramics and composites" A.J. Burggraaf, K. Keizer and A.J.A. Winnubst, pp. 1311-1326 in Materials Science Monographs, vol. 67, Ceramics Today-Tomorrow's Ceramics, ed. by P. Vincenzini, Elsevier Sc.Publ.B.V., 1991,

  133. "Grain growth during sintering of nanocrystalline Y and/or Ce-doped tetragonal zirconia" M.M.R. Boutz, G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, pp. 87-92 in Mater. Res. Soc. Symp. Proc. vol. 196, Superplasticity in metals, ceramics and intermetallics, ed. by M.J. Mayo, M. Kobayashi and J. Wadsworth, MRS (Pittsburgh) 1990,

  134. "Powder preparation and compaction behaviour of fine-grained Y-TZP", W.F.M. Groot Zevert, A.J.A. Winnubst, G.S.A.M. Theunissen and A.J. Burggraaf, Journal of Materials Science, 25 (1990) 3449

  135. "Segregation in ZrO2-Y2O3 ceramics" G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, pp. 365-372 in Surfaces and Interfaces of Ceramic Materials, ed. by L.C. Dufour, C. Monty and G. Petot-Ervas, Kluwer Academic Publ. (Dordrecht, NL) 1989, https://doi.org/10.1007/978-94-009-1035-5_21

  136. "The ageing behavior of ultra-fine grained Y-TZP" A.J.A. Winnubst and A.J. Burggraaf, pp. 39-48 in Advances in Ceramics vol. 24A, ed. by S. Somiya, N. Yamamoto and H. Yanagida, The American Ceramic Society, Inc. (Columbus, USA), 1989

  137. "Microstructure characteristics of ultra-fine ZrO2-Y2O3 ceramic powders", A.J.A. Winnubst, W.F.M. Groot Zevert, G.S.A.M. Theunissen and A.J. Burggraaf, Materials Science and Engineering, A109 (1989) 215

  138. "Segregation aspects in the ZrO2-Y2O3 system", G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Science Letters, 8 (1989) 55

  139.  “The analytical SEM and STEM, an indispensable tool in ceramics research”, B.A. Boukamp, A.J.A. Winnubst, K. Keizer, K.J. de Vries and A.J. Burggraaf, Ultramicroscopy 24­ [4] (1988) 426-427

  140. "Segregation in oxide surfaces, solid electrolytes and mixed conductors" A.J. Burggraaf and A.J.A. Winnubst, pp. 449-477 in Surface and near surface chemistry of oxide materials, ed. by J. Nowotny and L.C. Dufour, Elsevier (Amsterdam) 1988.

  141. "Tetragonal ZrO2-Y2O3, Part I: Preparation methods and characterisation", A.J.A. Winnubst, M.A.C.G. van de Graaf, K. Keizer, and A.J. Burggraaf, J. Phys. Colloques, 47 (1986) C1.596

  142. "Tetragonal ZrO2-Y2O3: Part II: The mechanical and electrical properties", K. Keizer, M. van Hemert, A.J.A. Winnubst, M.A.C.G. van de Graaf and A.J. Burggraaf, J. Phys. Colloques, 47 (1986) C1.783

  143. "Response behaviour of oxygen sensing solid electrolytes", A.J.A. Winnubst, A.H.A. Scharenborg and A.J. Burggraaf, Journal of Applied Electrochemistry, 15 (1985) 139

  144. "The electrode resistance of ZrO2-Y2O3(-Bi2O3) solid electrolytes with Pt electrodes", A.J.A. Winnubst, A.H.A. Scharenborg and A.J. Burggraaf, Solid State Ionics, 14 (1984) 319

  145. "The luminescence of yttria stabilized zirconia doped with Bi2O3", G. Blasse, Hao Zhiran, A.J. A. Winnubst and A.J. Burggraaf, Materials Research Bulletin, 19 (1984) 1057

  146. "Preparation and electrical properties of a monophasic ZrO2-Y2O3-Bi2O3 solid electrolyte", A.J.A. Winnubst and A.J. Burggraaf, Materials Research Bulletin, 19 (1984) 613

  147. "AES/STEM grain boundary analysis of stabilized zirconia ceramics", A.J.A. Winnubst, P.J.M. Kroot and A.J. Burggraaf, Journal of Physics and Chemistry of Solids, 44 (1983) 955-960

  148. "Effect of grain-boundary composition on the conductivity of yttria-stabilized zirconia" A.J.A. Winnubst, M.J. Verkerk and A.J. Burggraaf, pp. 177-183 in Advances in Ceramics, vol. 7, ed. by M.F. Yan and A.H. Heuer, The American Ceramic Society, Inc. (Columbus, Ohio) 1983.

  149. "Mechanical properties and fracture behaviour of ZrO2-Y2O3 ceramics", A.J.A. Winnubst, K. Keizer and A.J. Burggraaf, Journal of Materials Science, 18 (1983) 1958-1966

  150. "Effect of impurities on sintering and conductivity of yttria-stabilized zirconia", M.J. Verkerk, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Science, 17 (1982) 3113-3122

UT Research Information System

Projects

Projects on Porous Ceramic Membranes

This page will be updated soon

 

PhD Thesis (Co-)Advisor
  1. M. ten Hove, “Metal-doped hybrid silica for hydrothermally-stable hydrogen separation membranes” (2016)

  2. C.R. Tanardi, “Organically-modified ceramic membranes for solvent nanofiltration: Fabrication and transport studies” (2015)

  3. H.F. Qureshi, “Orchestrating the pore structure of hybrid silica membranes for molecular separation” (2014)

  4. W. Chen, “Oxygen transport membranes: A materials science and process engineering approach” (2014)

  5. A.F.M. Pinheiro “Development and characterization of polymer-grafted ceramic membranes for solvent nanofiltration“ (2013)

  6. S. Ran, “Ceramic composites of 3Y-TZP doped with CuO: Processing, microstructure and tribology” (2006)

  7. T.P. Raming, “The synthesis of nano-nano dual phase ceramic composites” (2000)

  8. B. Kerkwijk, “Wear and friction of nanostructured zirconia and alumina ceramics and composites” (1999)

  9. S. van der Gijp, “Preparation of homogeneously-doped barium titanate” (1998)

  10. C.D. Sagel-Ransijn, “Nanostructured zirconia ceramics by gel precipitation; Processing, microstructure and mechanical properties” (1996)

  11. Y.J. He, “Tribological and mechanical properties of fine-grained zirconia and zirconia-alumina ceramics” (1995)

  12. C.S. Chen, “Fine grained zirconia-metal dual phase composites; Oxygen permeation and electrical properties” (1994)

  13. M.M.R. Boutz, “Nanostructured tetragonal zirconia ceramics; microstructure, sinter forging and superplasticity” (1993)

  14. P. den Exter, “Synthesis, microstructure and mechanical properties of zirconia-alumina composites” (1991)

  15. G.S.A.M. Theunissen, “Microstructure, fracture toughness and strength of (ultra) fine-grained tetragonal zirconia ceramics” (1991)

 

Contact Details

Visiting Address

University of Twente
Faculty of Science and Technology
Horst Complex (building no. 20), room ME348
De Horst 2
7522LW  Enschede
The Netherlands

Navigate to location

Mailing Address

University of Twente
Faculty of Science and Technology
Horst Complex  ME348
P.O. Box 217
7500 AE Enschede
The Netherlands

Additional Contact Information

University of Science and Technology of China

School of Chemistry and Materials Science

Hefei, Anhui Province, P.R. China

http://en.scms.ustc.edu.cn/