I am associate professor at the University of Twente (UT) and adjunct visiting professor at the University of Science and Technology of China (USTC) in the School of Chemistry and Materials Science, P.R. China.

I supervised 18 PhD projects and (co-)authored more than 170 scientific papers .

I am a fellow and board member of the European Ceramic Society, editor of the Journal of the European Ceramic Society and guest editor of the 2024-Open Ceramics Special Issue on "Novel Ceramic Membranes and their Applications"

Expertise

  • Material Science

    • Membrane
    • Aluminum Oxide
    • Solvent
    • Ceramics
  • Chemistry

    • Procedure
    • Dioxygen
    • Silicon Dioxide
    • Gas

Organisations

Design of inorganic membranes and study of microstructure and transport properties.

Important aspects are knowledge and control of the microstructure (on the nanometer scale) during fabrication in order to obtain porous (hybrid) ceramic membranes and devices with special, unique, and reproducible properties.

Details are given on the Inorganic Membranes website

Other contributions

Publications in International Journals:

"Hybrid ceramic nanofiltration membranes prepared by impregnation and solid-state grafting of organo-phosphonic acids", Nikos Kyriakou, Elmar Boorsma, Gert-Jan Aardema, Guido Ritsema van Eck, Martin Drobek, Sissi de Beer, Arian Nijmeijer, Louis Winnubst and Marie-Alix Pizzoccaro-Zilamy, Journal of Membrane Science, 687 [5] (2023) 122041, https://doi.org/10.1016/j.memsci.2023.122041

"Performance evaluation of an industrial ceramic nanofiltration unit for wastewater treatment in oil production", Sandra Motta Cabrera, Louis Winnubst, Hannes Richter, Ingolf Voigt, Jeffrey McCutcheon and Arian Nijmeijer, Water Research, 220 (2022) 118593, https://doi.org/10.1016/j.watres.2022.118593

“Mechanical properties of BaCe0.65Zr0.2Y0.15O3-δ – Ce0.85Gd0.15O2-δ dual-phase proton-conducting material with emphasis on micro-pillar splitting", Wenyu Zhou, Jürgen Malzbender, Fanlin Zeng, Wendelin Deibert, Louis Winnubst, Arian Nijmeijer, Olivier Guillon, Ruth Schwaiger and Wilhelm Albert Meulenberg, Journal of the European Ceramic Society, (2022), https://doi.org/10.1016/j.jeurceramsoc.2022.03.020

"Controlled Nanoconfinement of Polyimide Networks in Mesoporous Îł-Alumina Membranes for the Molecular Separation of Organic Dyes", Nikos Kyriakou, Louis Winnubst, Martin Drobek, Sissi de Beer, Arian Nijmeijer and Marie-Alix Pizzoccaro-Zilamy, ACS Applied Nano Materials, 4 (2021) 14035-14046, https://doi-org.ezproxy2.utwente.nl/10.1021/acsanm.1c03322

"Industrial Application of Ceramic Nanofiltration Membranes for Water Treatment in Oil Sands Mines", Sandra Motta Cabrera, Louis Winnubst, Hannes Richter, Ingolf Voigt and Arian Nijmeijer, Separation and Purification Technology, 256 (2021) 117821, https://doi.org/10.1016/j.seppur.2020.117821

“Comparing the Performance of Organic Solvent Nanofiltration Membranes in Non-Polar Solvents”, Renaud B. Merlet, Louis Winnubst, Arian Nijmeijer, Mohammad Amirilargani, Ernst, J.R. Sudhölter, Louis C.P.M. de Smet, Sara Salvador Cob, Pieter Vandezande, Matthieu Dorbec, Soraya Sluijter, Henk van Veen, Yvonne van Delft, Ingrid Wienk, Petrus Cuperus, Subhalaxmi Behera, Yusak Hartanto, Ivo F. J. Vankelecom, Patrick de Wit, Chemie Ingenieur Technik (2021) 202100032. https://doi.org/10.1002/CITE.202100032

"Residual stress and mechanical strength of Ce0.8Gd0.2O2-δ-FeCo2O4 dual phase oxygen transport membranes" Fanlin Zeng, Jßrgen Malzbender, Stefan Baumann, Arian Nijmeijer, Louis Winnubst, Olivier Guillon, Ruth Schwaiger and Wilhelm A. Meulenberg, Journal of the European Ceramic Society 41 [13] (2021) 6539-6547, https://doi.org/10.1016/j.jeurceramsoc.2021.06.040

"Enhancing oxygen permeation of solid-state reactive sintered Ce0.8Gd0.2O2-δ-FeCo2O4 composite by optimizing the powder preparation method", Fanlin Zeng, Jßrgen Malzbender, Stefan Baumann, Arian Nijmeijer, Louis Winnubst, Olivier Guillon, Ruth Schwaiger and Wilhelm A. Meulenberg, Journal of Membrane Science, 628 (2021) 119284. https://doi.org/10.1016/j.memsci.2021.119248

"Gravity-Driven Separation of Oil/Water Mixture by Porous Ceramic Membranes with Desired Surface Wettability", Chunlei Ren, Wufang Chen, Chusheng Chen, Louis Winnubst and Lifeng Yan, Materials 14 (2021) 456, https://doi.org/10.3390/ma14020457

"Optimization of sintering conditions for improved microstructural and mechanical properties of dense Ce0.8Gd0.2.2O2-δ-FeCo2O4 oxygen transport membranes", Fanlin Zeng, Jßrgen Malzbender, Stefan Baumann, Arian Nijmeijer, Louis Winnubst, Mirko Ziegner, Olivier Guillon, Ruth Schwaiger and Wilhelm Albert Meulenberg, Journal of the European Ceramic Society 41 [1] (2021) 509-516,  https://doi.org/10.1016/j.jeurceramsoc.2020.09.009

"New Method toward a Robust Covalently Attached Cross-Linked Nanofiltration Membrane", Nikos Kyriakou, Renaud B. Merlet, Joshua D. Willott, Arian Nijmeijer, Louis Winnubst and Marie-Alix Pizzoccaro-Zilamy, ACS Applied Materials & Interfaces, 12 [42] (2020) 47948-47956,   https://doi.org/10.1021/acsami.0c13339

"Hybrid ceramic membranes for organic solvent nanofiltration: State-of-the-art and challenges”, Renaud B. Merlet, Marie-Alix Pizzoccaro-Zilamy, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 599 (2020) 117839,    https://doi.org/10.1016/j.memsci.2020.117839

"Hydrolytic stability of PEG-grafted γ-alumina membranes: Alkoxysilane vs phosphonic acid linking groups", Nikos Kyriakou, Marie-Alix Pizzoccaro-Zilamy, Mieke Luiten-Olieman, Arian Nijmeijer and Louis Winnubst, Microporous and Mesoporous Materials 307 (2020) 110516,   https://doi.org/10.1016/j.micromeso.2020.110516

“Phase and microstructural characterizations for Ce0.8Gd0.2O2-δ-FeCo2O4 dual phase oxygen transport membranes”, Fanlin Zeng, Jürgen Malzbender, Stefan Baumann, Manja Krüger, Louis Winnubst, Olivier Guillon and Wilhelm A. Meulenberg, Journal of the European Ceramic Society, 40 (2020) 5646-5652, https://doi.org/10.1016/j.jeurceramsoc.2020.06.035

"Melamine-Based Microporous Organic Framework Thin Films on an Alumina Membrane for High-Flux Organic Solvent Nanofiltration”, Mohammad Amirilargani, Giovana N. Yokota, Gijs H. Vermeij, Renaud B. Merlet, Guusje Delen, Laurens D.B. Mandemaker, Bert M. Weckhuysen, Louis Winnubst, Arian Nijmeijer, Louis C.P.M. de Smet and Ernst J.R. Sudhölter, CemSusChem, 13 (2020) 136-140

“Defect-free high-silica CHA zeolite membranes with high selectivity for light gas separation”, Pelin Karakiliç, Xuerui Wang, Freek Kapteijn, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 586 (2019) 34-43

"New Generation of Mesoporous Silica Membranes Prepared by a Stöber-Solution Pore-Growth Approach”, Marie-Alix Pizzoccaro-Zilamy, Cindy Huiskes, Enrico G. Keim, Soraya Nicole Sluijter, Henk van Veen, Arian Nijmeijer, Louis Winnubst and Mieke W.J. Luiten-Olieman, ACS Appl. Mater. Interfaces 11 (2019) 18528−18539

“Molecular separation using poly (styrene-co-maleic anhydride) grafted to γ-alumina: Surface versus pore modification” Mohammad Amirilargani, Renaud B. Merlet, Liangyong Chu, Arian Nijmeijer, Louis Winnubst, Louis C.P.M. de Smet, Ernst J.R. Sudhölter, Journal of Membrane Science, 582 (2019) 298-306

“Growing to shrink: nano-tunable polystyrene brushes inside 5 nm mesopores” Renaud B. Merlet, Mohammad Amirilargani, Louis C.P.M. de Smet, Ernst J.R. Sudhölter, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 572 (2019) 632-640

"From amorphous to crystalline: Transformation of silica membranes into silicalite-1 (MFI) zeolite layers”, Pelin Karakiliç, Ryo Toyoda, Freek Kapteijn, Arian Nijmeijer and Louis Winnubst, Microporous and Mesoporous Materials, 276 (2019) 52-51

“MIL-53(Al) and NH2-MIL-53(Al) modified α-alumina membranes for efficient adsorption of dyes from organic solvents”, Mohammad Amirilargani, Renaud B. Merlet, Pegah Hedayati, Arian Nijmeijer, Louis Winnubst, Louis C.P.M. de Smet and Ernst J.R. Sudhölter, Chemical Communications, 55 (2019) 4119-4122

"Robust super-hydrophobic ceramic coating on alumina with water and dirt repelling properties”, Yanan Li, Jianqiang Gu, Junwei Wang, Xin Xu, Louis Winnubst, Chusheng Chen, Journal of the American Ceramic Society 102 (2019) 6267-6274

“Poly (maleic anhydride-alt-1-alkenes) directly grafted to γ-alumina for high-performance organic solvent nanofiltration membranes”, Mohammad Amirilargani, Renaud B. Merlet, Arian Nijmeijer, Louis Winnubst, Louis C.P.M. de Smet and Ernst J.R. Sudhölter, Journal of Membrane Science, 564 (2018) 259-266

“One-Pot Synthesis of High-Flux b-Oriented MFI Zeolite Membranes for Xe Recovery”, Xuerui Wang, Pelin Karakiliç, Xinlei Liu, Meixia Shan, Arian Nijmeijer, Louis Winnubst, Jorge Gascon and Freek Kapteijn, ACS Applied Materials & Interfaces 10 (2018), 33574-33580

“Uniformly Oriented Zeolite ZSM‐5 Membranes with Tunable Wettability on a Porous Ceramic”, Donglong Fu, Joel Schmidt, Paul Pletcher, Pelin Karakiliç, Xinwei Ye, Carolien Vis, Pieter Bruijnincx, Matthias Filez, Laurens Mandemaker, Louis Winnubst and Bert Marc Weckhuysen, Angewandte Chemie, International Edition, 57 (2018) 12458-12462

“Micropore structure stabilization in organosilica membranes by gaseous catalyst post-treatment”, A. Petra Dral, Ernst R.H. van Eck, Louis Winnubst and Johan E. ten Elshof, Journal of Membrane Science, 548 (2018) 157–164

“Sol-gel processed magnesium-doped silica membranes with improved H2/CO2 separation”, Pelin Karakiliç, Cindy Huiskes, Mieke W.J. Luiten-Olieman, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 543 (2017) 195-201

“Interpreting rejection in SRNF across grafted ceramic membranes through the Spiegler-Kedem model”, Renaud B. Merlet, Cheryl R. Tanardi, Ivo. F.J. Vankelecom, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 525 (2017) [1] 359-367

“Hydrothermal stability of silica, hybrid silica and Zr-doped hybrid silica membranes”, Marcel ten Hove, Mieke W.J. Luiten-Olieman, Cindy Huiskes, Arian Nijmeijer and Louis Winnubst, Separation and Purification Technology, 189 (2017) 46-53

“Engineering durable hydrophobic surfaces on porous alumina ceramics using in-situ formed inorganic-organic hybrid nanoparticles”, Jianqiang Gu, Junwei Wang, Yanan Li, Xin Xu, Chusheng Chen and Louis Winnubst, Journal of the European Ceramic Society, 37 (2017) 4843-4848

“Influence of the intermediate layer on the hydrothermal stability of sol-gel derived hybrid silica membranes”, Marcel ten Hove, Mieke W.J. Luiten-Olieman, Cindy Huiskes, Arian Nijmeijer and Louis Winnubst, Journal of the European Ceramic Society, 37 [10] (2017) 3435-3441

“Enhanced water desalination performance through hierarchically-structured ceramic membranes”, Tong Liu, Libin Lei, Jianqiang Gu, Yao Wang, Louis Winnubst, Chusheng Chen, Chunsong Ye and Fanglin Chen, Journal of the European Ceramic Society, 37 (2017) 2431-2438

“Long-term flexibility-based structural evolution and condensation in microporous organosilica membranes for gas separation”, A. Petra Dral, Kristianne Tempelman, Emiel J. Kappert, Louis Winnubst, Nieck E. Benes and Johan E. ten Elshof, Journal of Materials Chemistry A, 5 (2017) 1268-1281

“Coupled-PDMS grafted mesoporous γ-alumina membranes for solvent nanofiltration”, Cheryl R. Tanardi, Arian Nijmeijer and Louis Winnubst, Separation and Purification Technology, 169 (2016) 223-229

“Polyethyleneglycol grafting of γ-alumina membranes for solvent resistant nanofiltration”, Cheryl R. Tanardi, Romina Catana, Mihai Barboiu, André Ayral, Ivo F.J. Vankelecom, Arian Nijmeijer and Louis Winnubst, Microporous and Mesoporous Materials, 229 (2016) 106-116

“Preparation of alumina membranes comprising a thin separation layer and a support with straight open pores for water desalination”, Jianqiang Gu, Chunlei Ren, Xu Zong, Chusheng Chen and Louis Winnubst, Ceramics International, 42 (2016) 12427-12434

“Chemical modification/grafting of mesoporous alumina with polydimethylsiloxane (PDMS)”, Ana F.M. Pinheiro, Arian Nijmeijer, Venkata G.P. Sripathi and Louis Winnubst, European Journal of Chemistry, 6 (2015) 287-295

“Solvent permeation behavior of PDMS grafted γ-alumina membranes”, Cheryl R. Tanardi, Ivo F.J. Vankelecom, Ana F.M. Pinheiro, Kishore K.R. Tetala, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 495 (2015) 216-225

“Membrane-integrated oxy-fuel combustion of coal: Process design and simulation”, Wei Chen, Louis van der Ham, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 492 (2015) 461-470

“Auto-combustion synthesis of perovskite-type oxides SrTi1−xFexO3−δ”, S.F.P. ten Donkelaar, R. Ruhl, S.A. Veldhuis, A. Nijmeijer, L. Winnubst, H.J.M. Bouwmeester, Ceramics International, 41 (2015) 13709-13715

“Facile synthesis of zirconia doped hybrid organic inorganic silica membranes”, Marcel ten Hove, Arian Nijmeijer and Louis Winnubst, Separation and Purification Technology, 147 (2015) 372-378

“An accurate way to determine the ionic conductivity of mixed ionic–electronic conducting (MIEC) ceramics”, Wei Chen, Nicolas Nauels, Henny J.M. Bouwmeester, Arian Nijmeijer and Louis Winnubst, Journal of the European Ceramic Society 35 (2015) [11] 3075-3083

“Hybrid silica membranes with enhanced hydrogen and CO2 separation properties”, Hessel L. Castricum, Hammad F. Qureshi, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 488 (2015) 121-128

“Doped microporous hybrid silica membranes for gas separation”, Hammad F. Qureshi, Rogier Besselink, Johan E. ten Elshof, Arian Nijmeijer and Louis Winnubst, Journal of Sol-Gel Science and Technology, 75 (2015) [1] 180-188

“A novel malonamide bridged silsesquioxane precursor for enhanced dispersion of transition metal ions in hybrid silica membranes”, Rogier Besselink, Hammad F. Qureshi, Louis Winnubst and Johan E. ten Elshof, Micro and Mesoporous Materials, 214 (2015) 45-53

“Preparation and characterization of hydrophobic alumina planar membranes for water desalination”, Chunlei Ren, Hong Fang, Jianqiang Gu, Louis Winnubst and Chusheng Chen, Journal of the European Ceramic Society, 35 (2015) 723-730

“Waste-to-resource preparation of a porous ceramic membrane support featuring elongated mullite whiskers with enhanced porosity and permeance”, Li Zhu, Yingchao Dong, Stuart Hampshire, Sophie Cerneaux and Louis Winnubst, Journal of the European Ceramic Society, 35 (2015) 711-721

“Modeling water flux and salt rejection of mesoporous γ-alumina and microporous organosilica membranes”, Ali Farsi, Vittorio Boffa, Hammad F. Qureshi, Arian Nijmeijer, Louis Winnubst and Morten Lykkegaard Christensen, Journal of Membrane Science, 470 (2014) 307-315

“PDMS grafting of mesoporous γ-alumina membranes for nanofiltration of organic solvents”, Cheryl R. Tanardi, Ana F.M. Pinheiro, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 469 (2014) 471-477

“Oxygen-selective membranes integrated with oxy-fuel combustion”, Wei Chen, Chu-sheng Chen, Henny Bouwmeester, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 463 (2014) 166-172

“Development of a PDMS-grafted alumina membrane and its evaluation as solvent resistant nanofiltration membrane”, Ana F.M. Pinheiro, Danny Hoogendoorn, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 463 (2014) 24-32

"Phase-inversion tape casting and oxygen permeation properties of supported ceramic membranes”, Wei He, Hua Huang, Jian-fen Gao, Louis Winnubst and Chu-sheng Chen, Journal of Membrane Science, 452 (2014) 294-299

“Preparation and electrical properties of Ni0.6Mn2.4-xSnxO4 NTC ceramics”, Zhongbing Wang, Zhenbo Li, Yi Zhang, Ruyian Zhang, Pan Qin, Chunnian Chen and Louis Winnubst, Ceramics International, 40 (2014) 4875-4878

“Influence of sol–gel process parameters on the microstructure and performance of hybrid silica membranes”, Hammad F. Qureshi, Arian Nijmeijer and Louis Winnubst, Journal of Membrane Science, 446 (2013) 19-25

“Phase-inversion tape casting and synchrotron-radiation computed tomography analysis of porous alumina”, Hong Fang, Chunlei Ren, Yaoge Liu, Detang Lu, Louis Winnubst and Chu-sheng Chen, Journal of the European Ceramic Society, 33 (2013) 2049-205

“Open source powder based rapid prototyping machine for ceramics”, A. Budding, T.H.J. Vaneker and L. Winnubst, Procedia, 6 (2013) 533-538

“Oxygen non-stoichiometry determination of perovskite materials by a carbonation process”, Wei Chen, Arian Nijmeijer and Louis Winnubst, Solid State Ionics, 229 (2012) 54-58

“Applying ceramic nanoporous microneedle arrays as a transport interface in egg plants and an ex-vivo human skin model”, Michel Verhoeven, Svetlana Bystrova, Louis Winnubst, Hammad F. Qureshi, Tanja D. de Gruijl, Rik J. Scheper and Regina Luttge, Microelectronic Engineering 98 (2012) 659-662

“Effect of temperature on friction and wear behaviour of CuO–zirconia composites”, Mahdiar Valefi, Matthijn de Rooij, Dirk J. Schipper and Louis Winnubst, Journal of the European Ceramic Society, 32 [12] (2012) 2235-2242

“Towards a generic method for inorganic porous hollow fibers preparation with shrinkage-controlled small radial dimensions, applied to Al2O3, Ni, SiC, stainless steel, and YSZ”, Mieke W.J. Luiten-Olieman, Michiel J.T. Raaijmakers, Louis Winnubst, Ton C. Bor, Matthias Wessling, Arian Nijmeijer and Nieck E. Benes, Journal of Membrane Science, 407-408 (2012) 155-163

“Production and characterization of micro- and nano-features in biomedical alumina and zirconia ceramics using a tape casting route”, Maciej Domanski, Louis Winnubst, Regina Luttge, Edwin Lamers, X. Frank Walboomers, John Jansen and Han Gardeniers, Journal of Materials Science: Materials in Medicine, 23 [7] (2012) 1637-1644

“Processing and in vivo evaluation of multiphasic calcium phosphate cements with dual tricalcium phosphate phases”, Marco A. Lopez-Heredia, Matilde Bongio, Marc Bohner, Vincent Cuijpers, Louis Winnubst, Natasja van Dijk, Joop G.C. Wolke, Jeroen J.J.P. van den Beucken and John A. Jansen, Acta Biomaterialia, 8 (2012) 3500-3508

“Non-glycosylated BMP-2 can induce ectopic bone formation at lower concentrations compared to glycosylated BMP-2”, F.C.J. van de Watering, J.J.J.P. van den Beucken, S.P. van der Woning, A. Briest, A. Eek, H. Qureshi, L. Winnubst, O.C. Boerman and J.A. Jansen, Journal of Controlled Release, 159 (2012) 69-77

“In vitro and in vivo evaluation of the inflammatory response to nanoscale grooved substrates”, Edwin Lamers, X. Frank Walboomers, Maciej Domanski, Ljupcho Prodanov, Jacoline Melis, Regina Luttge, Louis Winnubst, James M. Anderson, Han J.G.E. Gardeniers, and John A. Jansen, Nanomedicine: Nanotechnology, Biology and Medicine, 8 (2012) 308-317

“The effect of an alumina counterface on friction reduction of CuO/3Y-TZP composite at room temperature”, Jiupeng Song, Mahdiar Valefi, Matthijn de Rooij, Dirk J. Schipper and Louis Winnubst, Wear, 274-275 (2012) 75-83

“Submicron-patterning of bulk titanium by nanoimprint lithography and reactive ion etching”, M. Domanski, R. Luttge, E. Lamers, X.F. Walboomers, L. Winnubst, J.A. Jansen and J.G.E. Gardeniers, Nanotechnology 23 [6] (2012) 065306 (12pp)

“A generic method for inorganic porous hollow fibers preparation with shrinkage-controlled small radial dimensions”, M.W.J. Luiten-Olieman, L. Winnubst, T. Bor, M. Wessling, A. Nijmeijer and N.E. Benes, Procedia Engineering 44 (2012) 644-645

“High-temperature tribological and self-lubricating behavior of copper oxide-doped Y-TZP composite sliding against alumina”, Mahdiar Valefi, Matthijn de Rooij, Dirk J. Schipper and Louis Winnubst, Journal of the American Ceramic Society, 94 [12] (2011) 4426-4434

“Ta-doped SrCo0.8 Fe0.2O3-δ membranes: Phase stability and oxygen permeation in CO2 atmosphere”, Wei Chen, Chusheng Chen and Louis Winnubst, Solid State Ionics, 196 [1] (2011) 30-33

“Porous stainless steel hollow fibers with shrinkage-controlled small radial dimensions”, Mieke W.J. Luiten-Olieman, Michiel J.T. Raaijmakers, Louis Winnubst, Matthias Wessling, Arian Nijmeijer and Nieck E. Benes, Scripta Materialia, 65 [1] (2011) 25-28

“Effect of microstructure and catalyst coating on the oxygen permeability of a novel CO2-resistant composite membrane”, Shumin Fang, Chusheng Chen and Louis Winnubst, Solid State Ionics, 190 (2011) 46-52

“The effect of ball milling grinding pathways on the bulk and reactivity properties of calcium phosphate cements”, M. A. Lopez-Heredia, M. Bohner, W. Zhou, A. J. A. Winnubst, J. G. C. Wolke and J. A. Jansen, Journal of Biomedical Materials Research - Part B: Applied Biomaterials, 98B (2011) 68-79

“Composite capillary membrane for solvent resistant nanofiltration”, S.M. Dutczak, M.W.J. Luiten-Olieman, H.J. Zwijnenberg, L.A.M. Bolhuis-Versteeg, L. Winnubst, M.A. Hempenius, N.E. Benes, M. Wessling and D. Stamatialis, Journal of Membrane Science, 372 [1-2] (2011) 182-190

“Porous stainless steel hollow fiber membranes via dry-wet spinning”, Mieke W.J. Luiten-Olieman, Louis Winnubst, Arian Nijmeijer, Matthias Wessling and Nieck E. Benes, Journal of Membrane Science, 370 [1-2] (2011) 124-130

“Manipulation of sintering behavior by initial freeze pressing an aqueous alumina suspension”, Jumeng Zheng, Louis Winnubst, Velianti, Shumin Fang and David Salamon, Advanced Engineering Materials, 13 [1-2] (2011) 77-81

“Effect of Zr4+ doping on the oxygen stoichiometry and phase stability of SrCo0.8Fe0.2O3−δ oxygen separation membrane”, W. Chen, Y.B. Zuo, C.S. Chen and A.J.A. Winnubst, Solid State Ionics, 181 (2010) 971-975

"Ceramic microfluidic monoliths by ice templating”, Jumeng Zheng, David Salamon, Leon Lefferts, Matthias Wessling and Louis Winnubst, Microporous and Mesoporous Materials 134 (2010) 216-219

“Synthesis and characteristics of 3Y-TZP and CuO powders for ceramic composites”, Louis Winnubst, Peter J. de Veen, Shen Ran and Dave H.A. Blank, Ceramics International, 36 (2010) 847-853

“Effect of TiO2 doping on the characteristics of macroporous Al2O3/TiO2 membrane supports”, Hong Qi, Yiqun Fan, Weihong Xing and Louis Winnubst, Journal of the European Ceramic Society, 30 [6] (2010) 1317-1325

“Manipulating microstructure and mechanical properties of CuO doped 3Y-TZP nano-ceramics using spark-plasma sintering”, Shen Ran, Jozef Vleugels, Shuigen Huang, Kim Vanmeensel, Dave H.A. Blank and Louis Winnubst, Journal of the European Ceramic Society, 30 [4] (2010) 899-904

“Cryo dualbeam focused ion beam-scanning electron microscopy to evaluate the interface between cells and nanopatterned scaffolds”, E. Lamers, X. F. Walboomers, M. Domanski, G. McKerr, B.M. O’Hagan, C.A. Barnes, L. Peto, R. Lüttge, L. Winnubst, H.G.J. Gardeniers and J. A. Jansen, Tissue Engineering-Part C: Methods 17 [1] (2010) 1-7

“The influence of nanoscale grooved substrate on osteoblast behavior and extracellular matrix deposition”, Edwin Lamers, X. Frank Walboomers, Maciej Domanski, Joost te Riet, Falco van Delft, Regina Luttge, Louis Winnubst, Han Gardeniers and John A. Jansen, Biomaterials 31 (2010) 3307-3316

“A novel method for the fabrication of freestanding PZT features on substrates”, Joost G. van Bennekom, Louis Winnubst, Wietze Nijdam, Matthias Wessling and Rob G.H. Lammertink, Journal of the European Ceramic Society, 29 [15] (2009) 3227-3233

“Dry-sliding self-lubricating ceramics: CuO doped 3Y-TZP”, Shen Ran, Louis Winnubst, Dave H.A. Blank, Henry R. Pasaribu, Jan-Willem Sloetjes and Dik J. Schipper, Wear, ­267 (2009) 1696-1701

“Analysis of reactions during sintering of CuO-doped 3Y-TZP nano-powder composites”, Louis Winnubst, Shen Ran, Emiel A. Speets and Dave H.A. Blank, Journal of the European Ceramic Society, 29 [12] (2009) 2549-2557

“Aging of nickel manganite NTC ceramics”, Dao-lai Fang, Cui-hong Zeng, Chu-sheng Chen and A.J.A. Winnubst, Journal of Electroceramics, 22 (2009) 421-427

“Effects of Cu and Zn co-doping on the electrical properties of Ni0.5Mn2.5O4­ NTC ceramics”, Chunhua Zhao, Biyun Wang, Pinghua Yang, Louis Winnubst and Chusheng Chen, Journal of the European Ceramic Society, 28 [1] (2008) 35-40

“Preparation and electrical properties of FexCu0.10Ni0.66Mn2.24−xO4 (0 ≤ x ≤ 0.90) NTC ceramics” Dao-lai Fang, Chu-sheng Chen and A.J.A. Winnubst, Journal of Alloys and Compounds, 454 [1-2] (2008) 286-291

“Effect of microstructure on the tribological and mechanical properties of CuO-doped 3Y-YZP ceramics”, Shen Ran, Louis Winnubst, Dave H. A. Blank, Henry R. Pasaribu, Jan-Willem Sloetjes and Dik J. Schipper, Journal of the American Ceramic Society, 90 [9] (2007) 2747-2752

“Sintering behaviour and microstructure of 3Y-TZP + 8 mol% CuO nano-powder composite”, S. Ran, A.J.A. Winnubst, H. Koster, P. de Veen and D.H.A. Blank, Journal of the European Ceramic Society, 27 [2-3] (2007) 683-687

“Stability and oxygen permeation behavior of Ce0.8Sm0.2O2−δ–La0.8Sr0.2CrO3−δ composite membrane under large oxygen partial pressure gradients”, Bo Wang, Jianxin Yi, Louis Winnubst and Chusheng Chen, Journal of Membrane Science, 286 [1-2] (2006) 22-25

“Effect of annealing in O2 or N2 on the aging of Fe0.5Mn1.84Ni0.66O4 NTC-ceramics”, Zhongbing Wang, Chunhua Zhao, Pinghua Yang, Louis Winnubst and Chusheng Chen, Solid State Ionics, 177 [19-25] (2006) 2191-2194

“Oxygen permeation through a Ce0.8Sm0.2O2−δ–La0.8Sr0.2CrO3−δ dual-phase composite membrane”, Jianxin Yi, Yanbo Zuo, Wei Liu, Louis Winnubst and Chusheng Chen, Journal of Membrane Science, 280 [1-2] (2006) 849-855

“X-ray diffraction and infrared studies of FexMn2.34-xNi0.66O4 (0<x<1) NTC ceramics”, Zhongbing Wang, Chunhua Zhao, Pinghua Yang, A.J.A. Winnubst, Chusheng Chen, Journal of the European Ceramic Society, 26 [13] (2006) 2833-2837

“Synthesis, sintering and microstructure of 3Y-TZP/CuO nano-powder composites”, Shen Ran, Louis Winnubst, Wika Wiratha and Dave H.A. Blank, Journal of the European Ceramic Society, 26 [4-5] (2006) 391-396

“Preparation of Ultra-Fine Nickel Manganite Powders and Ceramics by a Solid-State Coordination Reaction”, Dao-lai Fang, Zhong-bing Wang, Ping-hua Yang, Wei Liu, Chu-sheng Chen and A.J.A. Winnubst, Journal of the American Ceramic Society, 89 [1] (2006) 230-235

“Sintering Behavior of 0.8 mol%-CuO-Doped 3Y-TZP Ceramics”, Shen Ran, Louis Winnubst, Wika Wiratha and Dave H.A. Blank, Journal of the American Ceramic Society, 89 [1] (2006) 151-155

“Environmental effects on friction and wear of dry sliding zirconia and alumina ceramics doped with copper oxide”, H.R. Pasaribu, K.M. Reuver, D.J. Schipper, S. Ran. K.W. Wiratha, A.J.A. Winnubst and D.H.A. Blank, International Journal of Refractory Metals and Hard Materials, 23 (2005) 386 - 390

“Research and education on inorganic and ceramic materials in the Netherlands”, H.T. Hintzen and A.J.A. Winnubst, J. Soc. Inorg. Mater. Japan, 12 (2005) 222-23

“Friction and wear studies on nylon-6/SiO2 nanocomposites”, Monserrat Garcia, Matthijn de Rooij, Louis Winnubst, Werner E. van Zyl and H. Verweij, Journal of Applied Polymer Science, 92 [3] (2004) 1855 -186

“Friction behaviour of solid oxide lubricants as second phase in a-Al2O3 and Stabilized ZrO2 composites” Bas Kerkwijk, Monserat Garcia, Werner E. van Zyl, Louis Winnubst, Elmer J. Mulder, Dik J. Schipper and Henk Verweij, Wear, 256 (2004) 182 -189

“A wear-resistant zirconia ceramic for low friction application”, A.J.A. Winnubst, S. Ran, K.W. Wiratha, D.H.A. Blank, H.R. Pasaribu, J-W. Sloetjes and D.J. Schipper, Key Engineering Materials 264-268 (2004) 809-812

“Densification of zirconia-hematite nanopowders”, T.P. Raming, A.J.A. Winnubst, W.E. van Zyl and H. Verweij, Journal of the European Ceramic Society, 23 [7] (2003) 1053-1060

“Electrochemical characterisation of 3Y-TZP-Fe2O3 composites” B.A. Boukamp, T.P. Raming, A.J.A. Winnubst and H. Verweij, Solid State Ionics, 158 (2003) 381-394

“The synthesis and characterisation of mixed Y2O3-doped ZrO2 and a-Fe2O3 nanosized powders” T.P. Raming, A.J.A. Winnubst and H. Verweij, Journal of Materials Chemistry, 12 (2002) 3705 – 3711

“The synthesis and magnetic properties of nanosized hematite (a-Fe2O3) particles” T.P. Raming, A.J.A. Winnubst, C.M. van Kats and A.P. Philipse, Journal of Colloid and Interface Science, 249 (2002) 346-350 ; https://doi.org/10.1006/jcis.2001.8194

“Synthesis and characterisation of dual-phase Y-TZP and RuO2 nanopowders: dense electrode precursors”, Werner E. van Zyl, Louis Winnubst, Tomas P. Raming, Riaan Schmuhl and Henk Verweij, Journal of Materials Chemistry, 12 [3] (2002) 708-713

“Analysis of In-doped CaZrO3 using a peroxo-oxalate complexation method”, Leen van Rij, Louis Winnubst, Le Jun and Joop Schoonman, Journal of Materials Chemistry, 10 [11] (2000) 2515-2521

“Processing of homogeneous zirconia-toughened alumina ceramics with high dry-sliding wear resistance”, Bas Kerkwijk, Louis Winnubst, Elmer J. Mulder and Henk Verweij, Journal of the American Ceramic Society, 82 [8] (1999) 2087-2093

“Preparation of BaTiO3 by homogeneous precipitation” S. van der Gijp, M.H.J. Emond, A.J.A. Winnubst and H.Verweij, Journal of the European Ceramic Society, 19 (1999) 1683-1690

“Peroxo-oxalate preparation of doped barium titanate”, Sven van der Gijp, Louis Winnubst and Henk Verweij, Journal of the American Ceramic Society, 82 [5] (1999) 1175-1180

“Tribological properties of nanoscale alumina-zirconia composites” B. Kerkwijk, A.J.A. Winnubst, H. Verweij, W.J. Mulder, H.S.C. Metselaar, and D.J. Schipper, Wear, 225-229 (1999) 1293-1302

“Thermally induced wear of ceramics”, H.S.C. Metselaar, A.J.A. Winnubst and D.J. Schipper, Wear, 225-229 (1999) 857 – 861

"Superplastic deep drawing of tetragonal zirconia ceramics at 1160°C", A.J.A. Winnubst and M.M.R. Boutz, Journal of the European Ceramic Society, 18 (1998) 2101-06

“Sintering and densification; new techniques: sinter forging” A.J.A. Winnubst and M.M.R. Boutz, pp. 301-323 in: Key Engineering Materials, vols. 153-154, Zirconia Engineering Ceramics, Ed. by E. Kisi, Trans Tech Publications (Zürich, Switzerland) ISBN 0-87849-793-5, (1998)

“Preparation of La0.3Sr0.7CoO3-δ perovskite by thermal decomposition of metal-EDTA complexes", R.H.E. van Doorn, H. Kruidhof, A. Nijmeijer, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Chemistry, 8 [9] (1998) 2109-12

"An oxalate-peroxide complex used in the preparation of doped barium titanate", S. van der Gijp, A.J.A. Winnubst and H. Verweij, Journal of Materials Chemistry, 8 [5] (1998) 1251-54

“Effects of grain size and ceria addition on ageing behaviour and tribological properties of Y-TZP ceramics”, S.R. Jansen, A.J.A. Winnubst, Y.J. He, H. Verweij P.G.T. van der Varst and G. de With, Journal of the European Ceramic Society, 18 (1998) 557 – 553

“Effects of a second phase on the tribological properties of Al2O3 and ZrO2 ceramics”, Y.J.He, A.J.A. Winnubst, D.J. Schipper, A.J. Burggraaf and H. Verweij, Wear, 210 (1997) 178-187

“Sliding wear of ZrO2 - Al2O3 composite ceramics”, Y.J. He, A.J.A. Winnubst, A.J. Burggraaf, H. Verweij, P.G.T. van der Varst and G. de  With, Journal of the European Ceramic Society, 17 (1997) 1371-1380

"Influence of porosity on friction and wear of tetragonal zirconia polycrystals”, Yingjie He, Louis Winnubst, Antonie J. Burggraaf, Henk Verweij, Paul G.Th. van der Varst and Bert de With, Journal of the American Ceramic Society, 80 [2] (1997) 377-80

“Grain growth in ultra-fine grained Y-TZP ceramics”, C.D. Sagel-Ransijn, A.J.A. Winnubst, A.J. Burggraaf and H. Verweij, Journal of the European Ceramic Society, 17 (1997) 1133-141

“Production of defect-poor nanostructured ceramics of yttria-zirconia”, C.D. Sagel-Ransijn, A.J.A. Winnubst, B. Kerkwijk, A.J. Burggraaf and H. Verweij, Journal of the European Ceramic Society, 17 (1997) 831-841

“Plasticity of nanocrystalline zirconia ceramics and composites”, A.J.A. Winnubst, M.M.R. Boutz, Y.J. He, A.J. Burggraaf and H. Verweij, Ceramics International, 23 (1997) 215-221

“Zirconia-toughened alumina (ZTA) with improved homogeneity for tribological applications”, B. Kerkwijk, A.J.A. Winnubst, A.F. Stassen and H. Verweij, Key Engineering Materials, 132-136 (1997) 297-300

“Wet chemical preparation of doped barium titanate powders and ceramics”, S. van der Gijp, A.J.A. Winnubst and H. Verweij, Key Engineering Materials, 132-136 (1997) 77-80

“Grain-size dependence of sliding wear in tetragonal zirconia polycrystals”, Yingjie He, Louis Winnubst, Antonie J. Burggraaf, Henk Verweij, Paul G.Th. van der Varst and Bert de With, Journal of the American Ceramic Society, 79 (1996) 3090-3096

"Enhanced mechanical properties by grain boundary strengthening in ultra-fine-grained TZP ceramics", Y.J. He, A.J.A. Winnubst, C.D. Sagel-Ransijn, A.J. Burggraaf and H. Verweij, Journal of the European Ceramic Society, 16 [6] (1996) 601-612

”The influence of crystallisation and washing medium on the characteristics of nanocrystalline Y-TZP”, C.D. Sagel-Ransijn, A.J.A. Winnubst, H. Verweij and A.J. Burggraaf, Journal of the European Ceramic Society, 16 (1996) 759-766

"The effect of ceria co-doping on chemical stability and fracture toughness of Y-TZP", M.M.R. Boutz, A.J.A. Winnubst, B. van Langerak, R.J.M. Olde Scholtenhuis, K. Kreuwel and A.J. Burggraaf, Journal of Materials Science, 30 (1995) 1854-1862

"Friction and wear behaviour of ceramic-hardened steel couples under reciprocating sliding motion", Y.J. He, A.J.A. Winnubst, D.J. Schipper, P.M.V. Bakker, A.J. Burggraaf and H. Verweij, Wear, 184 (1995) 33-43

"Microstructural development, electrical properties and oxygen permeation of zirconia-palladium composites", C.S. Chen, B.A. Boukamp, H.J.M. Bouwmeester, G.Z. Cao, H. Kruidhof, A.J.A. Winnubst and A.J. Burggraaf, Solid State Ionics, 76  [1-2] (1995) 23-28,

"Low-temperature sinter forging of nanostructured Y-TZP and YCe-TZP", Michel M.R. Boutz, Louis Winnubst, Antonie J. Burggraaf, Marco Nauer and Claude Carry, Journal of the American Ceramic Society, 78 (1995) 121-128

"Sinter forging of zirconia toughened alumina", Y.J. He, A.J.A. Winnubst, H. Verweij and A.J. Burggraaf, Journal of Materials Science, 29 (1994) 6505-6512

"Improvement of mechanical properties of zirconia-toughened alumina by sinter forging", Y.J. He, A.J.A. Winnubst, H. Verweij and A.J. Burggraaf, Journal of Materials Science, 29 (1994) 5868-5874

"Characterization of grain boundaries in superplastically deformed Y-TZP ceramics", Michel M.R. Boutz, Chusheng Chen, Louis Winnubst and Antonie J. Burggraaf, Journal of the American Ceramic Society, 77 (1994) 2632‑2640

"Effect of additives on densification and deformation of tetragonal zirconia", M.M.R. Boutz, A.J.A. Winnubst, F. Hartgers and A.J. Burggraaf, Journal of Materials Science, 29 (1994) 5374-5382

"Effect of calcination on the sintering of gel-derived zirconia-toughened alumina", Peter den Exter, Louis Winnubst, Theo H.P. Leuwerink and Antonie J. Burggraaf, Journal of the American Ceramic Society, 77 [9] (1994) 2376-2380

"Low temperature superplastic flow of yttria stabilized tetragonal zirconia polycrystals", M.M.R. Boutz, A.J.A. Winnubst, A.J. Burggraaf, M. Nauer and C. Carry, Journal of the European Ceramic Society, 13 (1994) 103-111

"Yttria-ceria stabilized tetragonal zirconia polycrystals: Sintering, grain growth and grain boundary segregation", M.M.R. Boutz, A.J.A. Winnubst and A.J. Burggraaf, Journal of the European Ceramic Society, 13 (1994) 89-102

"A hydrothermal route for production of dense, nanostructured Y-TZP", M.M.R. Boutz, R.J.M. Olde Scholtenhuis, A.J.A. Winnubst and A.J. Burggraaf, Materials Research Bulletin, 29 (1994) 31-40

"Thermal stability of nanostructured titania and titania-ceria  ceramic powders prepared by the sol-gel process", G.W. Koebrugge, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Chemistry, 3 (1993) 1095-1100

"The electrical characterization of grain boundaries in ultra-fine grained Y-TZP", C.S. Chen, M.M.R. Boutz, B.A. Boukamp, A.J.A. Winnubst, K.J. de Vries and A.J. Burggraaf, Materials Science and Engineering A: Structural materials, 168 (1993) 231-234

"The preparation and characterization of Y-TZP/20 wt.% alumina", P. den Exter, A.J.A. Winnubst and A.J. Burggraaf, Journal of the European Ceramic Society, 11 (1993) 497-507

"Sintering kinetics and microstructure development of nanoscale Y-TZP ceramics", G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, Journal of the European Ceramic Society, 11 (1993) 315-324

"Sinter forging as a tool for improving the microstructure and mechanical properties of zirconia toughened alumina", A.J.A. Winnubst, Y.J. He, P.M.V. Bakker, R.J.M. Olde Scholtenhuis and A.J. Burggraaf, pp. 284 - 291 in Science and Technology of Zirconia V, ed. by S.P.S. Badwal, M.J. Bannister and R.H.J. Hannink, Technomic Publ. Co. (Lancaster, Basel) 1993,

"Surface and grain boundary analysis of doped zirconia ceramics studied by AES and XPS", G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Science, 27 (1992) 5057

"Low temperature sinter forging of nanostructured Y-TZP", M.M.R. Boutz, A.J.A. Winnubst, A.J. Burggraaf, M. Nauer and C. Carry, pp. 275 - 283 in Science and Technology of Zirconia V, ed. by S.P.S. Badwal, M.J. Bannister and R.H.J. Hannink, Technomic Publ. Co. (Lancaster, Basel) 1993

"Mechanical properties of ultra-fine grained zirconia ceramics", G.S.A.M. Theunissen, J.S. Bouma, A.J.A. Winnubst and A.J. Burggraaf,Journal of Materials Science, 27 (1992) 4429

"Effect of dopants on the sintering behaviour and stability of tetragonal zirconia ceramics", G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf,Journal of the European Ceramic Society, 9 (1992) 251

"Low temperature superplastic flow of yttria stabilized tetragonal zirconia polycrystals" M.M.R. Boutz, A.J.A. Winnubst, A.J. Burggraaf, M. Nauer and C. Carry, pp. 939-943 in Euro-Ceramics II, vol. 2, ed. by G. Ziegler and H. Hausner, Deutsche Keramische Gesellschaft e.V. (KĂśln) 1991.

"Sintering of ZTA at low temperatures through transition alumina densification" P. den Exter, A.J.A. Winnubst and A.J. Burggraaf, pp. 1377-1381 in Euro-Ceramics II, vol. 2, ed. by G. Ziegler and H. Hausner, Deutsche Keramische Gesellschaft e.V. (KĂśln) 1991.

"The influence of MgO on the microstructure during sintering of fine-grained alumina and zirconia/alumina composite", A. Bos, P.J.M. Grefte, P. den Exter, A.J.A. Winnubst, E.B.M. Doesburg, A.J. Burggraaf and H.J. Veringa, Science of Sintering, 23 (1991) 19-24

"Porous and dense nanophase ceramics and composites" A.J. Burggraaf, K. Keizer and A.J.A. Winnubst, pp. 1311-1326 in Materials Science Monographs, vol. 67, Ceramics Today-Tomorrow's Ceramics, ed. by P. Vincenzini, Elsevier Sc.Publ.B.V., 1991,

"Grain growth during sintering of nanocrystalline Y and/or Ce-doped tetragonal zirconia" M.M.R. Boutz, G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, pp. 87-92 in Mater. Res. Soc. Symp. Proc. vol. 196, Superplasticity in metals, ceramics and intermetallics, ed. by M.J. Mayo, M. Kobayashi and J. Wadsworth, MRS (Pittsburgh) 1990.

"Powder preparation and compaction behaviour of fine-grained Y-TZP", W.F.M. Groot Zevert, A.J.A. Winnubst, G.S.A.M. Theunissen and A.J. Burggraaf, Journal of Materials Science, 25 (1990) 3449

"Microstructure development during sintering of nanocrystalline tetragonal zirconia"  A.J.A. Winnubst, G.S.A.M. Theunissen, M.M.R. Boutz, and A.J. Burggraaf, pp. 523-528 in Proceedings of the 11th Risø Int. Symp. on Metallurgy and Materials Science: Structural Ceramics; processing, microstructure and properties, ed. by J.J. Bentzen, J.B. Bilde-Sørensen, N. Christiansen, A. Horsewell, B. Ralph, Risø Nat. Lab., (Roskilde, Denmark) 1990

"Segregation in ZrO2-Y2O3 ceramics" G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, pp. 365-372 in Surfaces and Interfaces of Ceramic Materials, ed. by L.C. Dufour, C. Monty and G. Petot-Ervas, Kluwer Academic Publ. (Dordrecht, NL) 1989, https://doi.org/10.1007/978-94-009-1035-5_21

"The ageing behavior of ultra-fine grained Y-TZP" A.J.A. Winnubst and A.J. Burggraaf, pp. 39-48 in Advances in Ceramics vol. 24A, ed. by S. Somiya, N. Yamamoto and H. Yanagida, The American Ceramic Society, Inc. (Columbus, USA), 1989

"Microstructure characteristics of ultra-fine ZrO2-Y2O3 ceramic powders", A.J.A. Winnubst, W.F.M. Groot Zevert, G.S.A.M. Theunissen and A.J. Burggraaf, Materials Science and Engineering, A109 (1989) 215

"Segregation aspects in the ZrO2-Y2O3 system", G.S.A.M. Theunissen, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Science Letters, 8 (1989) 55

“The analytical SEM and STEM, an indispensable tool in ceramics research”, B.A. Boukamp, A.J.A. Winnubst, K. Keizer, K.J. de Vries and A.J. Burggraaf, Ultramicroscopy 24­ [4] (1988) 426-427

"Segregation in oxide surfaces, solid electrolytes and mixed conductors" A.J. Burggraaf and A.J.A. Winnubst, pp. 449-477 in Surface and near surface chemistry of oxide materials, ed. by J. Nowotny and L.C. Dufour, Elsevier (Amsterdam) 1988.

“The sintering behaviour of fine-grained ZrO2-Y2O3 ceramics”, A.J.A. Winnubst, G.S.A.M. Theunissen, W.F.M. Groot Zevert and A.J. Burggraaf. Science of Ceramics 14 (1988) 309-314

"Tetragonal ZrO2-Y2O3, Part I: Preparation methods and characterisation", A.J.A. Winnubst, M.A.C.G. van de Graaf, K. Keizer, and A.J. Burggraaf, J. Phys. Colloques, 47 (1986) C1.596 ; https://doi.org/10.1051/jphyscol:1986186

"Tetragonal ZrO2-Y2O3: Part II: The mechanical and electrical properties" K. Keizer, M. van Hemert, A.J.A. Winnubst, M.A.C.G. van de Graaf and A.J. Burggraaf, J. Phys. Colloques, 47 (1986) C1.783

"Response behaviour of oxygen sensing solid electrolytes", A.J.A. Winnubst, A.H.A. Scharenborg and A.J. Burggraaf, Journal of Applied Electrochemistry, 15 (1985) 139

Chemical composition of oxidic interfaces in relation with electric and electrochemical properties” A.J. Burggraaf, M. van Hemert, D. Scholten and A.J.A. Winnubst, Materials Science Monographs, 28 (1985) 797-802

"The electrode resistance of ZrO2-Y2O3(-Bi2O3) solid electrolytes with Pt electrodes" A.J.A. Winnubst, A.H.A. Scharenborg and A.J. Burggraaf, Solid State Ionics, 14 (1984) 319

"The luminescence of yttria stabilized zirconia doped with Bi2O3" G. Blasse, Hao Zhiran, A.J. A. Winnubst and A.J. Burggraaf, Materials Research Bulletin, 19 (1984) 1057

"Preparation and electrical properties of a monophasic ZrO2-Y2O3-Bi2O3 solid electrolyte" A.J.A. Winnubst and A.J. Burggraaf, Materials Research Bulletin, 19 (1984) 613

"AES/STEM grain boundary analysis of stabilized zirconia ceramics" A.J.A. Winnubst, P.J.M. Kroot and A.J. Burggraaf, Journal of Physics and Chemistry of Solids, 44 (1983) 955-960

"Effect of grain-boundary composition on the conductivity of yttria-stabilized zirconia" A.J.A. Winnubst, M.J. Verkerk and A.J. Burggraaf, pp. 177-183 in Advances in Ceramics, vol. 7, ed. by M.F. Yan and A.H. Heuer, The American Ceramic Society, Inc. (Columbus, Ohio) 1983.

"Mechanical properties and fracture behaviour of ZrO2-Y2O3 ceramics" A.J.A. Winnubst, K. Keizer and A.J. Burggraaf, Journal of Materials Science, 18 (1983) 1958-1966

"Effect of impurities on sintering and conductivity of yttria-stabilized zirconia" M.J. Verkerk, A.J.A. Winnubst and A.J. Burggraaf, Journal of Materials Science, 17 (1982) 3113-3122

Research profiles

Projectson Design of Hybrid/Inorganic Membranes

PhD Thesis Advisor

N. Kyriakou “Organo-functionalized inorganic nanofiltration membranes through engineering at the molecular level” (2022)

P. Karakiliç "From amorphous silica membranes to crystalline high-silica zeolite membranes: New avenues for the fabrication of microporous inorganic membranes for gas separation applications"(2019)

R.B. Merlet, "Growing to Shrink: Grafting alumina mesoporous membranes for molecular separations"(2019)

M. ten Hove, “Metal-doped hybrid silica for hydrothermally-stable hydrogen separation membranes” (2016)

C.R. Tanardi, “Organically-modified ceramic membranes for solvent nanofiltration: Fabrication and transport studies” (2015)

H.F. Qureshi, “Orchestrating the pore structure of hybrid silica membranes for molecular separation” (2014)

W. Chen, “Oxygen transport membranes: A materials science and process engineering approach” (2014)

A.F.M. Pinheiro “Development and characterization of polymer-grafted ceramic membranes for solvent nanofiltration“ (2013)

S. Ran, “Ceramic composites of 3Y-TZP doped with CuO: Processing, microstructure and tribology” (2006)

T.P. Raming, “The synthesis of nano-nano dual phase ceramic composites” (2000)

B. Kerkwijk, “Wear and friction of nanostructured zirconia and alumina ceramics and composites” (1999)

S. van der Gijp, “Preparation of homogeneously-doped barium titanate” (1998)

C.D. Sagel-Ransijn, “Nanostructured zirconia ceramics by gel precipitation; Processing, microstructure and mechanical properties” (1996)

Y.J. He, “Tribological and mechanical properties of fine-grained zirconia and zirconia-alumina ceramics” (1995)

C.S. Chen, “Fine grained zirconia-metal dual phase composites; Oxygen permeation and electrical properties” (1994)

M.M.R. Boutz, “Nanostructured tetragonal zirconia ceramics; microstructure, sinter forging and superplasticity” (1993)

P. den Exter, “Synthesis, microstructure and mechanical properties of zirconia-alumina composites” (1991)

G.S.A.M. Theunissen, “Microstructure, fracture toughness and strength of (ultra) fine-grained tetragonal zirconia ceramics” (1991)

Address

University of Twente

Horst Complex (building no. 20), room ME365
De Horst 2
7522 LW Enschede
Netherlands

Navigate to location

Organisations

Additional contact information

University of Science and Technology of China (USTC)
School of Chemistry and Materials Science
Hefei, Anhui Province, P.R. China
http://en.scms.ustc.edu.cn/">http://en.scms.ustc.edu.cn/

Scan the QR code or
Download vCard